PDA

View Full Version : AEM SRI/DC 4-2/HKS catback/Nology wires


CivicSiR
06-15-2004, 11:59 AM
Okay. Some one needs to help me.

A few weeks ago I did 3 runs and pulled 138whp/116wtq w/ AEM SRI/DC 4-2/HKS catback/Nology wires. 75 degrees. Something's wrong.

What the hell could it be? Someone says maybe I have my Nology Hotwires mixed up... do I have a leak somewhere? I should be pushing 145-150whp and 128-135wtq. This shite is embarrassing. Please help you guys. (first thing I'm doing is getting a CAI to replace the SRI, but that aint gunna give me that kind of missing power)
STP03BlueSI
06-15-2004, 12:12 PM
It is possible about the wires. But I know someone that had 149hp with a CAI, Header, And Greddy EVO
ecsahs3
06-15-2004, 12:26 PM
try resetting your ecu, then drive like a bat outta hell for a bit.

also, what kinda dyno was it?
PAPITUYO326
06-15-2004, 04:33 PM
change your oil and filter before going

a new air filter would help ya out too

...try dynoing on a different dyno

i got 143 and 123 with injen cai and 2.25 crushbent b pipe in hot ass florida weather

check for leaks too...a possible exhaust leak or intake manifold leak might be killin ya
CivicSiR
06-15-2004, 05:01 PM
Hmm... well I think I'll be throwing on a CAI before I go dyno again. And I'll also do an oil and filter. There don't seem to be any leaks, and I really don't think it's a wiring problem because the car runs just fine... in fact, feels pretty quick despite the numbers...I think I might just need to go to another dyno facility... The one I did was Dynojet, and they had just been doing 4 wheel drive dynos (WRXs). I'll get to the bottom of this..... grr.
PAPITUYO326
06-15-2004, 08:37 PM
that might be it...maybe you went to a dyno made for 4 wheel drive cars...

did you ever dyno there before?
ecsahs3
06-20-2004, 10:57 AM
i've heard somewhere that when the 4 wheel dyno's are switched to 2 wheel, they aren't as accurate.
CivicSiR
06-20-2004, 11:28 AM
PapiTuyo, Nope, I hadn't dynod there before...

ecsah, well, I hope that's what it was... I'm gunna try to dyno early this week ELSEWHERE, and hopefully I'll get back to you guys with higher numbers :)

Thanks for the help.
j0000stin
05-19-2008, 07:03 PM
PapiTuyo, Nope, I hadn't dynod there before...

ecsah, well, I hope that's what it was... I'm gunna try to dyno early this week ELSEWHERE, and hopefully I'll get back to you guys with higher numbers :)

Thanks for the help.

yeah you might want to go to a 2 wheel dyno because 4 wheel dynos are usually unaccurate