Question about the aluminum shifter bushings...

[FurY]

Hey all, I had a question about the aluminum shifter bushings...

Right now, whenever I rev hard and shift from 1st to 2nd anywhere past 6k RPM, I grind the gears. I have my foot all the way to the floor on the clutch and I still have this problem. I was wondering, will the aluminum shifter bushings that I am getting going to help with this grind?

Also, could someone please elaborate a bit on what people say when they talk about the shifts being "more precise?" Maybe could someone compare and explaing shifting before and after the aluminum bushings? Thanks.

[ATRIOT]

The bushing wont help with your "grind" problem, get your local dealer to chech that out. K your shifter assembley is mounted on 4 rubber bushings that allow the entire piece to flex, when your car is in gear you should still be able to move the shifter up a bit more when in 1st 3rd and 5th and down a bit more when in 2nd and 4th. With the shifter bushings installed the flex is almost eliminated, so when your shifter is in gear it cannot travel any futher.