HELP! MaxSpeed Spring Install

[Vierge99]

I have a set of MaxSpeed springs and I need help with the install. I need to know how much to cut the bump stop if I have to. People say that for different springs you have to cut your bump stop to different lengths or you get a replacement bump stop in the box. Well mine didn't come with any so I need to know how much to cut mine if I have to.

[Civicvtec1ps]

Moved to Suspension Suspension

I didn't cut bump stops at all.

[Vierge99]

Without cutting them, how far wsa your drop and have you noticed any problems? I'm going to be using the factory struts for a while and no camber kit. Will my tires be okay?

[Civicvtec1ps]

Without cutting them, how far wsa your drop and have you noticed any problems? I'm going to be using the factory struts for a while and no camber kit. Will my tires be okay?
Around 1.3-1.5" drop with Tein S tech springs on stock Shocks.
No Problem at all.

Havn't noticed any negative camber tire wear with minor drop.

[Jpax]

With my tein drop also i had no problems , the fronts were fine, the rear can use a camber kit but its NOT required, your tires will be fine. but remember they will wear after a while on the insides.

[i-vtec04si]

i did maxspeed on mine and didnot cut the bump stop the ride is excelent and the alignment is perfect here is a pic


http://medfordtuners.com/temp/4-11-04%20002.jpg