PDA

View Full Version : What needs to be modded?



Suk02Si
10-31-2002, 11:02 PM
What needs to be modded to make jdm bumpers fit?

http://www.imagestation.com/picture/sraid37/pa289ad95fabb2b357689ff70a994acf7/fd18ece1.jpg

Is it just the black piece(#1)? or the actual bumper(#2)?

2k2civicSi
10-31-2002, 11:14 PM
not 100% sure but i thinkg its the 5mph bumper the black thing in the pic

Pradamuimui
10-31-2002, 11:54 PM
Either call the place that you bought it from...or go to the website www.jdmhondaparts.com get the phone number to thier business, call them LIE and say that you need to know how to make it fit right. You could also ask the people at www.optionsauto.com Im sure that either of these places could tell you how to do it!! Oh...and by the way, when you find out how to it PLEASE POST INSTRUCTIONS, and SHARE the wealth!!!!

IceD out N CALI
11-01-2002, 12:05 AM
sorry for the question but did you buy a jdm bumper or just asking?

Mr.02BlackSIguY
11-01-2002, 12:10 AM
yea... did u buy the JDM bumper and it doesnt fit? im confused

Suk02Si
11-01-2002, 12:37 AM
I'm planning on going jdm all the way. I was thinking of going with champ white later on, jdm bumpers, etc...

If it's just the black piece then its no biggie; I'll call optauto or jdmhondaparts tomorrow and let you guys know what's up.

It'd be awesome if I could go right hand drive, but I hear its a bitch to do. I was gonna get a crx and make it RHD but got this ep instead:)

DownTheHatch
11-01-2002, 07:29 AM
Yes, its only the black piece that need to be removed. As a requirement in the states every car has to pass a 5mph crash with no damage to the bumper which is why our front bumper sticks out farther to accomodate the foam.

Just remove it and your JDM bumper fits. I suggest asking FiZZ about it, he has jdm bumpers.

NamingException
11-01-2002, 09:44 AM
That foam piece is a pain in the ass. The little nubs on it that hold it on the bumper broke off mine, I had to attach it to the bumper with tape.

Suk02Si
11-01-2002, 10:59 AM
That foam piece is a pain in the ass. The little nubs on it that hold it on the bumper broke off mine, I had to attach it to the bumper with tape.


haha, same thing happend to me when that photo was taken. I used masking tape to hold it on. :cool:

EDIT:
JDM Honda Parts just responded to my email, they said



you would need to remove the complete bumper support

jdmhondaparts.com
10699 Hickson St
Suite 3
El Monte CA, 91731
Tel:(626) 618 1103
Fax: (626) 618 1107

Mr.02BlackSIguY
11-01-2002, 03:30 PM
so whats the complete bumper support? only the black foam piece rite? or do u haveta unscrew some metal peices?

Suk02Si
11-01-2002, 06:07 PM
I'm guessing the actual bumper(metal) piece; which isn't hard to remove, just kinda sucks that you have to do that just to get jdm bumpers to fit.

2k2civicSi
11-01-2002, 07:06 PM
i dont think you have to take off the real bumper just the foam 5mph bumper

todaCspec
11-02-2002, 05:46 AM
if it does require removing the bumper support(metal thing), don't they have a jdm bumper support that you can purchase and replace with? i think that the 5mph foam cushion would need to be removed.

Mr.02BlackSIguY
11-02-2002, 04:04 PM
who in here has this kit? FIZZ...where are u, tell us what needs to be done please. thanks

Race2DnB
11-06-2002, 02:02 AM
hmmm. should it still be considerd JDM even when the CTR and SI arent made in the Japan?