View Full Version : ok im happy
kenscivic
07-07-2004, 03:09 PM
160.2 whp and 132.8 torque , im a happy camper today this is with an ingen cai , dc sports 4 - 2 - 1 header , free flow cat , 2 1/2" midpipe , and air fuel adjusting. but im happy even with the scratches on my car im happy
that's some good numbers you pulled there. what type of dyno was it. what gear did you pull in
What a/f "adjustment tool" did you use?
kenscivic
07-07-2004, 03:23 PM
thats an excellent question i saw a piece o paper on the wall in the garage that said dyno jet all i know is i drove up on two spinny thingys and they secured the car and told me to take it easy through 3 gears and slam it in 4th
*edit* i got a vafc 2 and at the end of it i was still running rich in early rpms and leaning out at about 6500 so i think if it got tuned a lil more i might get 161 whp
thats an excellent question i saw a piece o paper on the wall in the garage that said dyno jet all i know is i drove up on two spinny thingys and they secured the car and told me to take it easy through 3 gears and slam it in 4th
Let me rephrase the ? ....
Do you have a VAFC? an SAFC? an ODBII scan tool? a K-Pro ecu?
*EDIT: I saw your edit. ;)
lol
kenscivic
07-07-2004, 03:26 PM
oops
Civicvtec1ps
07-07-2004, 04:29 PM
Moved to Dyno
Where is DYNO sheet?
Post it up.
PAPITUYO326
07-08-2004, 10:23 AM
Moved to Dyno
Where is DYNO sheet?
Post it up.
word!
is that header the race header or the shorty?
zirai10
07-08-2004, 11:42 AM
what does 160 WHP approximate to at the crank?? how many ponies there??
PAPITUYO326
07-08-2004, 11:55 AM
what does 160 WHP approximate to at the crank?? how many ponies there??
bout 185ish
kenscivic
07-08-2004, 08:00 PM
its a shorty header it was funny though on the 4th run it was at like 156 and i was like *DAMMIT!* and than i saw the ac was on and turned it off and it jumped to 160
oogy-boogy
07-08-2004, 08:05 PM
Post up them sheets.......Those are close to RH numbers...
PAPITUYO326
07-09-2004, 07:20 AM
Post up them sheets.......Those are close to RH numbers...
w3rd homie w3rd
anjapower
07-09-2004, 07:22 AM
best numbers I've seen for a shorty header A3. Congrats. Now what exactly do you mean by free-flow cat? Test pipe or hi-flow cat?
Gasp23
07-09-2004, 07:53 AM
Congrats on the WHP! Nice set up!
kenscivic
07-09-2004, 08:16 AM
high flow cat.
oogy-boogy
07-09-2004, 08:24 AM
Nice....
Where are the pics / sheets?
kenscivic
07-09-2004, 10:44 AM
no scanner on this computer ill have some up by next week when i get my computer that i ordered.
DavidT
07-09-2004, 10:53 PM
Dyno sheet would be nice. Most dyno shops don't make you gun it in 3rd and slam it into 4th lol, they make you run it into red until fuel cut-off and let off the gas.
pearlwhiteLude
07-14-2004, 08:11 PM
Dyno sheet would be nice. Most dyno shops don't make you gun it in 3rd and slam it into 4th lol, they make you run it into red until fuel cut-off and let off the gas.
yea i was about to say lol...
dkid15
04-21-2008, 04:12 PM
you should pick up a DCRH i think you could hit 166-168whp with that
shadowmd
04-21-2008, 04:18 PM
old!!! thread lol
pynikal
04-21-2008, 04:42 PM
i think thats going to be happening alot now.:mbiggrin:
thisisagame24
04-21-2008, 04:46 PM
nice numbers ken
2004ep3hatch
04-21-2008, 04:47 PM
nice numbers ken
lol
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.