RSX-S rear sway bar

[BISDAK-R]

i'm planning to buy RSX-s sway bar and i've heard many good comments about this mod. I just wanted to know what I need to buy, just the bar or do i also need the bolts and bushing or can I just use mine. thanks

[Silvershadow]

If used they usaully throw in the bushings.if ur lucky you'll get the endlinks.If not use your old 1's.I've heard of guys use the OEM 17mm bushings.

[goy091]

all you need is the bar and the two 19mm bushings, everything else is the same.

[BISDAK-R]

thanks, so its just the bar and the bushings and I can use my stock endlinks?

[K20A3Si]

yes...your endlinks will work.

[BISDAK-R]

there's a guy selling me progress 22mm sway bar just the bar, will this fit in our EP? do I need any other parts?thanks again for the replies.

[Civicvtec1ps]

there's a guy selling me progress 22mm sway bar just the bar, will this fit in our EP? do I need any other parts?thanks again for the replies.
Sway bar will fit on ep.

[BISDAK-R]

which one do you guys think i should buy? this guy selling his progress 22mm sway bar for 70 shipped and its got bushings, brackets, and bolts? would I be having problems with progress sway bar? or shoud i just go witht the 19mm rsx-s sway.

[Silvershadow]

Which is it u say has hardware in 1 post & in another post NO hardware?

[blackdc5]

Was the "$70 shipped" guy me? If so, I am selling the Progress 22mm Rear sway bar only (by that I mean the brace is not included...sorry I should have clarified). I DO have the two bushings to fit the 22mm sway, the brackets for the thicker bushings, and the two endclamps that hold the sway bar in place from moving side to side. It was grey, and I painted it black. Basically everything you need to mount the sway bar.

[blackyEP3]

Isn't our stock rear sway 15 mm??

[LiLxKeNnY]

make sure you get the right bar ... soem exhuasts dont clear the bar

[blackyEP3]

I think I am going to go with the 19mm RSX-S sway. Can I use my stock endlinks?

[Silvershadow]

K2OA3Si:

yes...your endlinks will work.

[blackyEP3]

Sweet!! Thx for the info! I am pretty excited. :)

[detroitsi]

yeah we can see :tongue:

[BarracksSi]

Isn't our stock rear sway 15 mm??

02-03's are 15 mm, and 04's (probably 05's too, I'll bet) are 17 mm.

Once I decide on which 22+mm rear sway to get, my RSX-S version will be up for sale...

[serialdriller]

I put the rear one in and its a good mod! :)
Way bigger than the 02 si sway bar.

The front type s one though like mentioned earlier looks smaller.

If anyone wants to buy a Type S front sway bar drop me a pm! :)

[oldschoolimport]

the type s front bar IS smaller, at 23mm. the smaller bar in front helps the front tires bite and exaggerates the larger bar in the rear. in other words, it helps initial turn-in.

larger bars (front or rear) make the outside tire "load" and slide. a smaller bar lets the tires articulate and dig in.