Pedal kit slowign down the car??

[EP3racer]

I have a razo pedal kit right now. my main concern was the bolts on the gas pedal and the clutch. On the gas pedal, the bolt that keep the kit together is about 1/2 -3/4 inch long. when flooring the gas, the end of the bolt hit the floor and peventing the pedal form contacting the floor. I think this keep the gas pedal from going all the way to the floor when accelating. So I am thinking that when steping on the gas rather than having 100% of the power I am only getting 90-95%? My best time at the track was 15.0 @ 91.7 before the pedals. After the petal my best was a 15.4@ 89.5ish The condition of the track and weather was very similiar.

Also on the Clutch the boltz are over 1 1/4 inch long I been grinding 3th, 5th gears during hard throttle no matter how slow I shift.

Anyone got any knowledge on this?

Thanks

[redronin22]

had same problem till i ground down the tips of the bolts.

[Silvershadow]

Pedal cable is adjustable.

[Stealth Wedgy]

sorry for thread jack....


How do you adjust the pedal cables, namely the clutch?

[oogy-boogy]

Dremel & the cutting wheel will take care of that problem in minutes ;). I had that problem on my 97 EX.

[EP3racer]

So u guys r saying that I was right about not getting 100% of the power right? .... that tite, cuz even since I couldn't get another 15.0 on the 1/4, I alway blame it on something studip.

Thanks again.

[oogy-boogy]

Check the bottom of the pedal. Some aftermarket pedals are also longer and have a tendancy to get pinched in the carpeting.

[TrippZ]

[QUOTE=EP3racer]I alway blame it on something studip.
[QUOTE]

I alway blame it on something studip too ;)

lol

Yeah, alot of pedals' screws/bolts are too long or the cover itself will hit the ground before WOT. take another look at it

[Silvershadow]

Stealth Wedgy:

How do you adjust the pedal cables, namely the clutch?

There NO clutch cables.I like clutch cables that way u could tell when ur clutch was going 2 go.With hydraulic,It's either All clutch or NO clutch.

[EP3racer]

ite.... Well I did blame on it on something stupid. Check out the gas pedal and found out tha ti was assemble differently than the brake and clutch. anyway so the pedal did not make my car go slower maby .0002 slower cuz of the weight lol. The clutch however is right on, but I was too busy to do it today.

crew the things I said about similiar weather and condition. I am blaming it on the humity, and hot temperature now. lol

Thanks anys guys.