talonXracer
04-19-2008, 01:46 AM
Here is the OEM Acura fog light switch part# 08V31-S6M-01035
this is for wiring up an OEM fog switch to a replica harness. it's pretty basic, you just need to understand the concept of how a circuit works. the pins on the OEM switch go like this:
pin 1-Power/Live wire
pin 2-Positive, this completes the circuit for the on/off function
pin 3-Power/Live wire for illumination
pin 4-Ground/Negative for illumination
pin 5-Ground/Negative for on/off function
http://i114.photobucket.com/albums/n263/NTCustoms/OEMfogswitch2.jpg
there may be a common misconception, pin 1 starts at the BOTTOM of the switch and it goes up.
this is for wiring up an OEM fog switch to a replica harness. it's pretty basic, you just need to understand the concept of how a circuit works. the pins on the OEM switch go like this:
pin 1-Power/Live wire
pin 2-Positive, this completes the circuit for the on/off function
pin 3-Power/Live wire for illumination
pin 4-Ground/Negative for illumination
pin 5-Ground/Negative for on/off function
http://i114.photobucket.com/albums/n263/NTCustoms/OEMfogswitch2.jpg
there may be a common misconception, pin 1 starts at the BOTTOM of the switch and it goes up.