PDA

View Full Version : Some one needs to post the Ridgeline Key Transplant diy



shenmuep3
04-20-2008, 03:15 PM
Guys we need the Ridgeline Key transplant diy again, namely I need the part number for the key just to make sure it is compatible with the ep, thanks guys lets build this site back up!!!:mbiggrin:

BobSassafrass
04-20-2008, 04:00 PM
I searched googles cache and couldn't find the diy unfortunately. But I think if you ask for an 06 ridgeline key there should only be one that comes up. Cost me $45 from the dealership I think. As long as the FCC ID is the same it should work fine.

The FCCID on mine is: QUCG8D-380H-A although those letters are tiny so I may be off.
And the IC: 850G-G8D380HA .

shenmuep3
04-20-2008, 04:29 PM
Thanks man, I will have to check this out at the dealer!!!

Jpax
04-20-2008, 04:39 PM
moved to how to section. this is not a DIY: this is a request for one.

shenmuep3
04-21-2008, 05:06 AM
Word, thanks jpax!

shenmuep3
04-23-2008, 04:35 PM
What is the part number for the ridgeline key that is compatible with our car?

shenmuep3
04-23-2008, 04:56 PM
Bump...Anyone???

ep3allen
09-05-2008, 07:30 PM
Damn I need this. I wonder if anyone has pics on how to transplant your key to the ridgeline key.

da9
09-06-2008, 07:09 AM
the actual part number is 35111-SHJ-305

rehatcher
09-06-2008, 09:49 PM
If you do a search for switchblade key you will find a few posts that will give you the general idea of what needs to be done to your stock key to get to the immobilizer. You can use either Ridgeline or Accord keys for this mod. I used an accord key and the most complicated part was driving to the dealer to get my key cut, they do this for free you know.
First things first, once you have your key, make sure you can program it to your car by following this series of steps:
Programming your keyless entry: Insert your current key into the ignition and turn ignition to on position; within 4 seconds press the lock button on your remote. Do this a total of four times. On the fourth cycle you will hear your door locks click; press the lock button on all remotes you would like programmed to your car.
Once you have established you bought the correct key and it will unlock/lock your doors, go get the key cut.
After the key is cut break out your Kleins and cut the plastic head off your car key to get to the immobilizer chip.
Search for pictures

rspjean
01-20-2011, 08:26 PM
is this ridgeline key a switchblade

RHCP0801
01-20-2011, 08:27 PM
no, they are not

rspjean
01-20-2011, 09:37 PM
oh ok thanks man so its only the acura keys that are switch blade?