View Full Version : fog lights
the JigGa mAn
04-21-2008, 08:12 PM
how is the install on fog lights on the ep3?
i saw a picture of a black ep with yellow fogs and i liked it...and i would like to get some fog lights now..
anyone have the ebay fogs? hows the fitment?
jshin03
04-21-2008, 08:16 PM
i remember reading the post from the old forum about foglights. It was a damn good post and really informative. Hopefully the person who posted that still has the info and could repost it.
I do remember saying the ebay fog fitment wasn't bad, but the quality of switches were a little suspect. Someone did say you could get some RSX switches though
2004ep3hatch
04-21-2008, 09:05 PM
Its not that hard man. Ill try to find a DIY for you if i can. It was not hard for me. hopefully somebody can point you in the right direction.
xsimplistikaznx
04-21-2008, 11:34 PM
so the EBAY fogs are imitations correct? i seen so many at really good prices, but hesitant on purchases though...
skoo74
04-21-2008, 11:47 PM
fits well on the USDM bumpers... here's a couple of shots...
http://i9.photobucket.com/albums/a99/jerryep3/Si/Fog6.jpg
http://i9.photobucket.com/albums/a99/jerryep3/Si/Fog2.jpg
http://i9.photobucket.com/albums/a99/jerryep3/Si/Fog1.jpg
http://i9.photobucket.com/albums/a99/jerryep3/Si/Fogs-Sideshot-1.jpg
danielakatoxic
04-22-2008, 01:37 AM
so the EBAY fogs are imitations correct? i seen so many at really good prices, but hesitant on purchases though...
i got the ebay fogs and they are fine for me. no fitment issues unless its the fog light button. its too big so im getting a rsx one. heres a pic. dont mind the nasty wheel gap. that was before my drop.
http://i5.photobucket.com/albums/y163/toxsick/me.jpg
ohdamngetit
04-22-2008, 12:17 PM
How to install...
http://www.k-series.com/tech_document.php?id=36
If that doesnt do it...
http://www.handa-accessories.com/civicsi.html
Scroll down to the fog lights and download the document on how to install.
I had no problem installing. A dremel and a steady hand is what you need when cutting the inserts on the front bumper. I got the ebay fog light kit. Fits well but the switch just sucks @$$. Hope this helps ^_^
OH! and if you want the rsx switch cause the ebay switch sucks @$$, Here ya go
http://forums.clubrsx.com/showpost.php?p=13097075&postcount=1
I actually just picked up the oem fog light switch for the EP3 from Honda. Heres the part number: 08V31-S5T-61035
I think I payed around $30
civictype_r04
04-22-2008, 07:01 PM
I got mine from tunerimage.com. The quality is good and the install wasn't that bad.
chuck83
04-22-2008, 07:14 PM
someone posted the oem install instructions before the database meltdown, after reading through it it doesn't seem that difficult, just plug a few things in, run some wires, the only part i dont like is having to cut the front plastic for the fog lights but eh what are you gonna do..
xsimplistikaznx
04-22-2008, 10:04 PM
cool i'll look into the ebay ones :msmile:
Stuckey
04-23-2008, 10:15 AM
I installed the ebay lights on my white ep3 recently and it wasn't that bad. The worst part is trying to cut the plastic w/o having the honda template to follow. But you can wing it.
Also the light switch had bad fitment and the relay was cheap. I ended up burning out the switch and having to replace the relay with a good relay from Radio Shack. Might as well splurge on an OEM foglight switch or just go buy a cheap illuminated 2 way switch from autozone.
frm_808
04-23-2008, 12:07 PM
my relay was also cheap and my switch was faulty! felt cheap. just went and bought oem ones. mine was not from ebay
PaTTi2103a
04-23-2008, 05:35 PM
how is the install on fog lights on the ep3?
i saw a picture of a black ep with yellow fogs and i liked it...and i would like to get some fog lights now..
anyone have the ebay fogs? hows the fitment?
i have the ebay ones, everything fits good except for the switch but overall i give it a 7/10.
ALL MotoR Ep3
04-23-2008, 05:46 PM
i love my fogs ...im gonna put JDM yellow HIDs on them soon.......
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.