PDA

View Full Version : ground control coilover , need help



ep3drc
04-22-2008, 10:19 PM
hey guys just got my ground control coilover sleeves today n im installing them myself , the thing is how do i know when each coilover is exactly at a 2 inch drop dont want to have an uneven drop

ep_hatcher_510
04-22-2008, 10:39 PM
Before installing, screw the perches of each sleeve in the same location, then after you just gotta measure and adjust until you like it.

civictype_r04
04-23-2008, 10:33 AM
Just adjust thats how coilovers work.

bluedevilI
04-23-2008, 12:13 PM
hey i got a question about ground control coilovers. do u weld the stock struts onto the coilover (unless u buy a diff. set a struts)?

mustclime
04-23-2008, 12:36 PM
hey i got a question about ground control coilovers. do u weld the stock struts onto the coilover (unless u buy a diff. set a struts)?

GC sleves are not welded to the strut.

ep_hatcher_510
04-23-2008, 12:38 PM
lol unless you want it permanently on there forever.

FCobra94
04-23-2008, 12:46 PM
Before installing, screw the perches of each sleeve in the same location, then after you just gotta measure and adjust until you like it.
What he said.

mustclime
04-23-2008, 12:46 PM
lol unless you want it permanently on there forever.

the housing are steel, the GC sleeves are al.....not possible.

MugsyTheGr8
04-23-2008, 01:05 PM
ground control sleeves are looking better and better to me.

SyckSiR
04-23-2008, 01:07 PM
the housing are steel, the GC sleeves are al.....not possible.

lol, i could do it.....anything is possible, just not practical

ep3drc
04-23-2008, 02:47 PM
hm another thing having a little trouble can anyone give me step by step instruction on how to install them :(