PDA

View Full Version : running lean



the JigGa mAn
04-23-2008, 10:50 PM
mods:
kpro, hondata airbox mod, esmm, rsx s dc rh, rsx s midpipe, stock axel back

i was reading on hondatas forum that when they created the hi-octane kal that it was on a stock a3..and hondata said that by adding a rh the car would run lean..how do i correct this? adding more fuel? and what is optimal a:f ratio?

Civic5lug
04-24-2008, 05:15 PM
Good place to start:
http://hondata.com/techk-protraining.html

Watch, take notes then go out to a open road and have fun!

the JigGa mAn
04-24-2008, 07:10 PM
Good place to start:
http://hondata.com/techk-protraining.html

Watch, take notes then go out to a open road and have fun!

its gonna be a long night..:faint:

Civic5lug
04-24-2008, 07:13 PM
its gonna be a long night..:faint:
Coffee ftw
:ranger:

civsirmt
04-24-2008, 07:43 PM
how do u know u r running lean? what i mean is what dose it say on ur laptop when u plug it in and put it in realtime.

Civic5lug
04-24-2008, 07:46 PM
how do u know u r running lean? what i mean is what dose it say on ur laptop when u plug it in and put it in realtime.

When you datalog it displays your a/f.

Jpax
04-25-2008, 09:53 AM
you can correct lean issuse by adding fuel, you will need to datalog before you do. then find out where you need to add fuel

the JigGa mAn
04-25-2008, 09:42 PM
excellent thank you gents very much, going to be installing some parts next weekend or so...so i will get a datalog at that time and post it up for some insight