View Full Version : Looking for a setup with a flat torque curve
Silver_EP3
04-27-2008, 02:42 AM
I'm really interested in having a setup thats not too aggressive for daily driving, but obtains peak torque relatively quickly and maintains it through out its powerband. I'm not looking for a dyno queen. I've seen a couple of dyno graphs of several JRSC setups, but i'd really like to get some opinions of those who have a setup.
I used to have a cybernation turbo kit, but now i'm running basic bolt ons because of gas and other reasons.
I was thinking either a k24a2 or k20a2 paired with JRSC.
Lucid Moments
04-27-2008, 06:13 AM
And either one of those will get you exactly what you want. I run a K24A2 s/c setup and enjoy it thoroughly. The power is simply always there whenever you step down on the accelerator.
4angrybadgers
04-27-2008, 07:23 AM
Even if you still have the a3, you can slap on the JRSC and have a nice meaty torque curve.
Tuned on the 3.8" pulley:
http://img.photobucket.com/albums/v703/102crew/tune%20in%20Mobile/power_curves.jpg
lleron
04-27-2008, 08:49 AM
My greddy kit has a pretty damn flat torque curve.
http://i157.photobucket.com/albums/t69/lleron/DSCF0868.jpg
jerseyjew
04-27-2008, 08:55 AM
Here are my results with the JRSC running the 4" pulley and some other goodies!
http://dynos.evans-tuning.com/235whpEp3JRSC.jpg
clutch797
04-27-2008, 10:34 AM
how is this for flat. k24a1 with the greddy kit.
http://i61.photobucket.com/albums/h48/moores155/tune.jpg
dobbs02si
04-27-2008, 02:32 PM
Here are my results with the JRSC running the 4" pulley and some other goodies!
http://dynos.evans-tuning.com/235whpEp3JRSC.jpg
That my friend is fllaaaat..just plain sexy if you ask me. One thing Ill give to the JRSC guys, insta-powa!
Silver_EP3
04-27-2008, 02:47 PM
Here are my results with the JRSC running the 4" pulley and some other goodies!
http://dynos.evans-tuning.com/235whpEp3JRSC.jpg
damn thats exactly what I'm looking for... are you still running the a3? More info on your setup would be greatly appreciated!
Here are my results with the JRSC running the 4" pulley and some other goodies!
http://dynos.evans-tuning.com/235whpEp3JRSC.jpg
Wow, that's amazingly smooth. Must feel sexy when you accelerate.
Silver_EP3
04-27-2008, 03:23 PM
And either one of those will get you exactly what you want. I run a K24A2 s/c setup and enjoy it thoroughly. The power is simply always there whenever you step down on the accelerator.
Hows the mileage on your setup? I've rode in nossy's car a while back and i think he was running same setup. When you installed did you run into many problems?
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.