PDA

View Full Version : JDM side skirt clips & brackets



MR.Pizza
04-28-2008, 06:10 PM
Jdm skirts came in today, does anyone know where I can come by the mounting clips and brackets?

Blaine
05-22-2008, 06:33 PM
GLUE!...


no sorry :mangel:

TezGari
05-24-2008, 07:14 PM
Same here.....

My side skirts (USDM CTR) is coming in, how did you guys install your USDM sides?

I was thinking self taping screws (From where?) and double sided tape and alott of glue....

I do not want to drill :meek:

RedSiBaron
05-24-2008, 07:24 PM
Jdm skirts came in today, does anyone know where I can come by the mounting clips and brackets?

heres the link to the thread that covered it, but i got jdmland.com to put up the part numbers for the underbody clips...d-unit just did his, so he has the info more readily available, i myself did them a year ago, so the info isnt as fresh anymore...anyway, heres the thread, the sideskirt info is in there somewhere

http://www.ephatch.com/forum/showthread.php?t=44454

TezGari
05-24-2008, 07:50 PM
heres the link to the thread that covered it, but i got jdmland.com to put up the part numbers for the underbody clips...d-unit just did his, so he has the info more readily available, i myself did them a year ago, so the info isnt as fresh anymore...anyway, heres the thread, the sideskirt info is in there somewhere

http://www.ephatch.com/forum/showthread.php?t=44454

Thats an awesome thread! Regarding the screws (Self tapping, flat headed ones) where did you get those from? Maybe home depot?

I am getting the USDM CTR lipkit and wanted to know how to install the CTR sides etc...

RedSiBaron
05-24-2008, 07:54 PM
Thats an awesome thread! Regarding the screws (Self tapping, flat headed ones) where did you get those from? Maybe home depot?

I am getting the USDM CTR lipkit and wanted to know how to install the CTR sides etc...

my best advice is wait till you get them (dunno if you have or not) and sit back and think, what is the best way to install them, if they were pulled out of a mold of the CTR skirts then you may be able to drill and use underbody clips from the real ctr skirts...on top of this you can mount them in the front with the oem fender liner screws...THEN get some good double sided adhesive and stick those babies on :mwink:

TezGari
05-24-2008, 08:15 PM
my best advice is wait till you get them (dunno if you have or not) and sit back and think, what is the best way to install them, if they were pulled out of a mold of the CTR skirts then you may be able to drill and use underbody clips from the real ctr skirts...on top of this you can mount them in the front with the oem fender liner screws...THEN get some good double sided adhesive and stick those babies on :mwink:

Thanks, great advice, I will have to def do this...My biggest fear was drilling, dont wana do that (into the body panels etc..)...

RedSiBaron
05-24-2008, 08:24 PM
Thanks, great advice, I will have to def do this...My biggest fear was drilling, dont wana do that (into the body panels etc..)...

well you shouldnt have to so thats good...only place would be under the skirt for the underclips...and if there arent holes in the front of the skirt, then you can make those...just want to be able to bolt up to the stock locations, no drilling into the car...make sure you fit them before you paint them...

TezGari
05-25-2008, 11:55 AM
well you shouldnt have to so thats good...only place would be under the skirt for the underclips...and if there arent holes in the front of the skirt, then you can make those...just want to be able to bolt up to the stock locations, no drilling into the car...make sure you fit them before you paint them...

Where did you get your self tapping screws and adhesive attachments?

Any special brand or product or place to buy these?
THe kit does not come with any screws or instructions (Should be straight forward) etc..

I will need aprox 4 screws for the front and rear lips (and double sided adhesive tape)..

For the sides maybe 8 screws and a whole lot of adhesive tape. I guess its kinda hard since I am getting the USDM kit etc..

Found a great thread...
http://www.ephatch.com/forum/showthread.php?t=42876&highlight=double+sided+tape
Seems the items in here are great!

What about this material:
http://www.handsontools.com/store-products-3M08115-3M-08115-Automix%99-Panel-Bonding-Adhesive%2C-200-mL-Cartridge_3873.html

or

http://www.handsontools.com/store-products-3M08107-3M-08107-Automix%99-Fast-Cure-Epoxy-Adhesive%2C-2-oz-pack_3937.html

or

http://www.handsontools.com/store-products-3M08063-3M-08063-Ultrapro%99-Trim-and-Emblem-Adhesive%2C-Pint_3907.html

I am thinking the above with some screws should help for the side skirts etc...


Check this install guide for the OEM HFP Side skirts;
http://www.handaccessories.com/civic/sisidespoil.pdf
I think the "brackets (6)" on page one would help alot! Anyone know how to aquire these guys from a honda dealership or if anyone has these online??

Kleinengines
06-02-2008, 08:21 AM
Glad to see im not the only one with this issue.

RedSiBaron
06-02-2008, 08:29 AM
well i dont know anything about mounting up usdm stuff, so i couldnt tell you what adhesive tape to use, but as for screws...why dont you just get the OEM ones from honda that are used for hte mudflaps, etc...and then they will look oem, and use a metal retainer behind the screw to make sure its tight...thats my advice

Rekognize
04-15-2011, 07:43 PM
http://i252.photobucket.com/albums/hh27/72chevel/sideskirtpics.gif

Here is the partnumbers for the side skirt installation

letter B screw,2 you reuse those from the wheel well
letter D is 91503-SZ3-003 can be bought from the states and are also used on the top and bottom of the front bumper and the bottom of the rear bumper.

Letter E is the Japan version for the 02 si you need the sticky tape version so you don't have to drill holes you just clip it in and it sticks to car they work real well Most people skip everyother cause they are are a little spendy for 20 plus of these! I think these can still be bought in the states last I heard they were back ordered.
is called clip,side sill GA
91513-S5S-E01

Letter F is japan version for the 02 si you just use double sticky tape clean the area real good and use a good 3m tape.

Letter G is the screw that holds the bracket H on the skirt you need 4 per side so 8 per car I think these need to be ordered from uk or japan.
90104-SR2-003

Letter H is the underbracket 2 per side 4 per car clip D goes though the hole at the top into the car body underneath. I think these need to be ordered from uk or japan.
71804-S5A-R00

Reposting since this post was buried in the jdm lip thread

RedSiBaron
04-16-2011, 10:18 AM
zombie thread, i would have bumped the jdm lip thread instead and re posted this

closed, no need for this to be open and moved to exterior