PDA

View Full Version : RSX-S 21mm rear sway bar clearance



JCEM
04-30-2008, 11:33 PM
Those of you who are running with the 21mm RSX-s rear sway bar, is there any clearance issues with your exhaust? Thinking about going that route, but I don't want to have the sway bar beating the crap out of my SP2.

thechromecoyote
04-30-2008, 11:47 PM
I rock the stock axelback, so I cant say how the clearance is with aftermarket ones.

But it clears just fine on stock.

talonXracer
05-01-2008, 05:29 AM
No issues whatsoever

Fico
05-01-2008, 05:30 AM
anyone have the actual part number for it?

talonXracer
05-01-2008, 05:35 AM
52300-S6M-A61 ..... swaybar
52306-S6M-A62 ..... bushing

Fico
05-01-2008, 06:07 AM
52300-S6M-A61 ..... swaybar
52306-S6M-A62 ..... bushing

talon is my hero:msmooch:

JCEM
05-01-2008, 10:04 AM
Thanks for the info guys.

Blue03Si
05-01-2008, 11:57 AM
Does this bar and bushing combo work with the stock bushing bracket, or do you need to buy the type-s one?

Is there much difference between the 21mm bar and the type-r 22mm bar?

talonXracer
05-01-2008, 12:00 PM
The stock brackets work fine. I have driven both rear bars and on my setup there was no difference. Other than price.....

ddhatch
05-01-2008, 06:56 PM
While on the topic, if using the RSX rear sway, do you need the RSX endlinks, or do the stock ones work? More specifically, can the RSX ends work on the Ep3 with RSX sway?

talonXracer
05-01-2008, 07:01 PM
While on the topic, if using the RSX rear sway, do you need the RSX endlinks, or do the stock ones work? More specifically, can the RSX ends work on the Ep3 with RSX sway?

yes they will work fine.

Brian Todd
05-02-2008, 05:10 PM
not to be off topic but where are most you buying them from new or used?

talonXracer
05-02-2008, 05:14 PM
not to be off topic but where are most you buying them from new or used?


From here new http://www.acuraautomotiveparts.org/acura/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=RSX&catcgry2=2006&catcgry3=3DR+TYPE-S&catcgry4=KA6MT&catcgry5=REAR+LOWER+ARM&ListAll=All&vinsrch=no&systemcomp=&vinnoT=&trim=&trans=&view=normal

Or from a 05'+ typeS that is wrecked or someone selling it when they upgraded.

Kerby
05-02-2008, 09:00 PM
I got mine from www.autopartspeople.com

with brackets and bushings the total was like $98 shipped.

just remember you want to go 05-06. the 02-04 is 19mm i think.

Brian Todd
05-03-2008, 08:06 PM
I appreciate it guys. thanks.