PDA

View Full Version : wide band a/f gauge...



classiccelica
05-04-2008, 06:16 PM
Ok so I want to install a wide band air fuel ratio gauge and need to know preferrably with pictures of which wire to splice into for the signal wire. Any help is greatly appriciated thank you.

bdooley
05-04-2008, 06:26 PM
Ok so I want to install a wide band air fuel ratio gauge and need to know preferrably with pictures of which wire to splice into for the signal wire. Any help is greatly appriciated thank you.

same here

thisisagame24
05-04-2008, 07:27 PM
with my wideband the only splicing is for power and ground. for the most part i think all of them have their own o2 sensor that you need to screw in to your exhuast some where before the cat but after the primary o2 sensor. or if you have a raceheader some wehre between the two o2 sensors

jaeguyoon
05-04-2008, 07:50 PM
with my wideband the only splicing is for power and ground. for the most part i think all of them have their own o2 sensor that you need to screw in to your exhuast some where before the cat but after the primary o2 sensor. or if you have a raceheader some wehre between the two o2 sensors

if you have buddy club rh it already has a bung for it! :meek:

classiccelica
05-04-2008, 07:53 PM
well I have a megan racing test pipe, so would that o2 that is supplied go where the secondary sensor goes or do I need to drill and weld cuz that will suck big time.

phill
05-16-2008, 09:39 AM
we have a wideband stock, all you need is a gauge

i also need to figure out the signal wire splice, im about to look it up in a wiring diag.

ill post if i find it

thisisagame24
05-16-2008, 12:57 PM
well I have a megan racing test pipe, so would that o2 that is supplied go where the secondary sensor goes or do I need to drill and weld cuz that will suck big time.

i had to drill a hole and weld the bung in there.....didnt cost me a thing since my buddy had access to the schools metal shop. friends that are mechanical engenerring majors FTW

firmk20
08-25-2008, 05:11 PM
Does anyone have any more info on this? iwas thinking ofgetting an air fuel gauge but they all come with an o2 sensor and are priced at like $350. I dont want to buy everything if i dont have to. any sugesstions

Accordexcpe95
08-25-2008, 05:22 PM
why do you need one?

firmk20
08-26-2008, 06:38 AM
why do you need one?

why wouldnt u need one if u have alot of perforfamnce parts.

talonXracer
08-26-2008, 07:14 AM
Unless you are FI there is no reason to get an A/F gauge.

02nhbpep3
08-26-2008, 11:08 AM
But I like the dancing lights:mredface: