PDA

View Full Version : amp question



labelhunter
11-10-2002, 12:47 PM
Which wire do i tap into for a remote. I know its blue but which one.

i-WERKS
11-12-2002, 07:59 AM
I'm not sure what you're asking.
The blue wire that comes out of the amp connects to p.cont in the aftermarket headunit

labelhunter
11-12-2002, 10:59 AM
im sorry i have figured this out. i was putting an amp on the stock deck but now i have an aftermarket one thank you

IceD out N CALI
11-12-2002, 11:59 AM
hey label if you get a chance post some pics of the install :)

labelhunter
11-12-2002, 03:20 PM
Hay thats a good idea i will this sunday when i do it.

Jpax
11-12-2002, 11:09 PM
heres is the wireing diagram

Radio factory plug is blue.....

http://www.digitalpose.com/mbr/511/9488/p/132954_6159852084733842737_vl.jpg

the wires going to it are as follows.

Radio 12v | white/red +
Radio 12v | Black -
Radio illuminate | red/black +
- = negitive + = positive. DUH.
LF Spk | grn/blk - lt green +
RF Spk | Grn/yel - Gry/red +
LR | blu/wht - blu/blk +
RR | pink - blu/yellow +


ok here it is ..