CTR rear sway bar Questions

[ND ep3]

It seems as though all of the sites people recommended for CTR rear sway bars no longer work....
where do I find one??
I would like to buy one but I can not seem to find a working web site that sells them... Anything suggestions would be greatly appreciated!!
Btw the reason I am thinking of going for the CTR over the RSX or Progress, is that I have heard of so many people having exhaust problems. Does anyone know if a Greddy EVOII we be a problem with a CTR bar? Also I do not have to by new end links do I? Thanks in advance for your input!!

[BobSassafrass]

I have a progress and it does rub the stock muffler a bit but not hurting anything. I've heard the 24mm has no issues at all through.

As for endlinks you don't have to get new ones but the first problem you're gonna run into is the likely rust on the stock ones preventing you from getting them off easily. If you don't break or strip them in the attempt to get them off you might be ok but if you drive really hard they will prolly break. I used stock endlinks on my progress bar for a few months till one too many spin outs finally snapped them. Its worth the money not to deal with that kinda hassle.

[ND ep3]

Thank you for the info about the endlinks! now all i hafta do is find where I can buy a CTR rear sway bar...if you know please pass on the info, thx!

[T_Virus]

I've been waiting for a CTR with Bushing from ICBmotorsports...they haven't had any for a couple of months now...and I'm still wondering if it would clear with the HKS Hi-power...Before the site crash, I remember people were saying that they had issues while others didn't...so I guess I have to get one and try it for myself...

[Elise98]

The CTR rear sway bar is 22mm, the 05-06 rsx type-s sway bar is 21mm which is a lot easier to find. So if you can't find the CTR one, just settle for the type-s bar

[jimmyjames]

If there is a bunch of immediate interest (I think there is) I will create a group buy.

[02nhbpep3]

I'm down for a G.B. i've been wanting to get the CTR rear sway

[ND ep3]

I'm def in, for a CTR rear sway if we can order one...

[mustclime]

just go to crsx and get a 25mm cusco rear bar.....same bends as stock and designed to be a upgrade for the type-r cars.:mwink:

[K-Shark]

i got mine off of ebay.

i recomend buying energy suspension poly bushings (the greasable ones) while you're at it.

[MugsyTheGr8]

+1 for type s rear sway. looking for one as we speak.

[02nhbpep3]

just go to crsx and get a 25mm cusco rear bar.....same bends as stock and designed to be a upgrade for the type-r cars.:mwink:

Are you running this sway? and if you are what exhaust setup do you have?

[mustclime]

Are you running this sway? and if you are what exhaust setup do you have?

yes, I am running a 65mm skunk2 cat back.....love it.

[jimmyjames]

I found a vendor with CTR sways in stock. He is sending me more info later today.
I'll let you all know.

[ND ep3]

Awesome, thanks man!!!!

[dragon208]

I've been waiting for a CTR with Bushing from ICBmotorsports...they haven't had any for a couple of months now...and I'm still wondering if it would clear with the HKS Hi-power...Before the site crash, I remember people were saying that they had issues while others didn't...so I guess I have to get one and try it for myself...

u have to also note how low are u going to be lowering your car. I know my HKS always hits the CTR sway bar cause i'm so damn low.. but i know if i raised the car up a bit.. should clear.. i think! :-)

[T_Virus]

I am dropped on Tein Basic coilovers, but don't know how low ...I'm running on 205/50/16 with about 1 finger gap between the wheel and shell...

[T_Virus]

I found a vendor with CTR sways in stock. He is sending me more info later today.
I'll let you all know.

If it could be CTR Sway bar with new bushing all for $100, that would be a awesome deal...:tea:

[ND ep3]

There were several web sites that people recommended back in 2004, like
http://www.polepositionproducts.com/jdmhonda/ep.htm
Hondawerx
http://www.ipsracing.com/
but none of these are working for me

If you do a simple search, most people said you could get one of these for $90-$100 dollars with the bushings......
this is what I'm looking for.....
If any one has info about this lemme know!

Thank you to those who have already provided information!!

[jimmyjames]

There were several web sites that people recommended back in 2004, like
http://www.polepositionproducts.com/jdmhonda/ep.htm
Hondawerx
http://www.ipsracing.com/
but none of these are working for me

If you do a simple search, most people said you could get one of these for $90-$100 dollars with the bushings......
this is what I'm looking for.....
If any one has info about this lemme know!

Thank you to those who have already provided information!!I got mine from Hondawerx in 2004! From what I have been hearing, the price has increased to possibly $150. Some vendors are saying a month and a half lead time.
I bought mine back then for $125 shipped and that has always been about the same price. I have never seen it as low as $90 though. (maybe without shipping?)
I will know more later.

[Windchaser]

I'm down to get one if it's under $125.

[RedSiBaron]

about a month ago i got my ctr sway from wayne over at ssr...did you try calling wayne??

i love my rear sway, i think it goes nicely with the ctr front :mwink:

[K-Shark]

i bought my CTR rear sway with ES bushings for about 120 total.

[ND ep3]

I emailed Pole position products and they said the ITR bar has a slightly different bend than the CTR bar, so it won't fit right. But both bars are $90 US on their website.
http://www.polepositionproducts.com/jdmhonda/ep.htm


FYI: The CTR rear anti-sway bar is supposed to be 22mm and can be had at poleposition.com for $90 USD.

Pole position......$90 ?????
I Know this was back in 2004.... but if we could get them for around $100 or so that we be awesome!!!
is this company still around?

[jimmyjames]

about a month ago i got my ctr sway from wayne over at ssr...did you try calling wayne??

i love my rear sway, i think it goes nicely with the ctr front :mwink:Wayne is the vendor who has some in stock. I am setting up a group buy for special pricing.

[RedSiBaron]

Pole position......$90 ?????
I Know this was back in 2004.... but if we could get them for around $100 or so that we be awesome!!!
is this company still around?

icb was selling them that kinda cheap, but when i spoke to the guy who runs it on the phone, he said that hes had them ordered from japan and he hasnt been getting htem in the shipments, he's pissed cuz its the first time hes run out since 2004...

[EPSU3]

After 5 months of searching, I bought the 21mm DC5 S rear bar. Put it on today, and I'm happy. 50 bucks with bushings. If you can find the CTR bar get it, if not, the 21mm bar feels pretty good.

[black_mamba]

group buy really :painkiller:





































j/k :bounce: i'm down for the right price :mwink:

[T_Virus]

i bought my CTR rear sway with ES bushings for about 120 total.

Where? new or used?

[T_Virus]

icb was selling them that kinda cheap, but when i spoke to the guy who runs it on the phone, he said that hes had them ordered from japan and he hasnt been getting htem in the shipments, he's pissed cuz its the first time hes run out since 2004...

Yeah, I'm still waiting on ICB, because they had the best price during that time and came with new bushing... all for $90 but now the price has gone up...

[K-Shark]

Where? new or used?

i bought the bar new off of ebay. i can't remember the seller's name though...sorry...

i bought the ES bushings new too...copped them from their distributor...

[jimmyjames]

Found another source with a good price. I may be able to get these to send out as early as next week. I'll let you know when I start the GB thread.

[02nhbpep3]

yes, I am running a 65mm skunk2 cat back.....love it.

are you getting any rattling "sp" ?

[kai-wun]

I'm interested aswell. Which endlinks are recommended?

[jimmyjames]

I'm interested aswell. Which endlinks are recommended?Stock work fine. I have had them in for 4 years with no problems. (I don't AutoX though)

[talonXracer]

LOL,, why waste that much money on something you couldnt differentiate from a 05' typeS rear sway(for half the cost)?

I have had both and was lucky enough to find a chump to buy the CTR sway for what I paid.

[BobSassafrass]

I just realized Talon changed his avatar.... it's kind of unsettling not seeing that samurai in every thread anymore.

[jimmyjames]

Group Buy started. $120 shipped. Hurry.
http://www.ephatch.com/forum/showthread.php?p=558143

[chino0k]

by any chance, does anyone know if the rsx/integra type-r rear swaybar is the same as the CTR rear sway?

[BobSassafrass]

Should be exactly the same.

Does anyone know where to find energy suspension sway bar bushings? I looked around and couldn't find anything.

[K-Shark]

Should be exactly the same.

Does anyone know where to find energy suspension sway bar bushings? I looked around and couldn't find anything.

http://www.energysuspensionparts.com/

i bought the black sway bar bushings (the greasable ones with the nipple) and got them pretty damn quick. i'd buy from them again.

[BobSassafrass]

Awesome thanks, but I can't seem to find the 21mm rear sway ones. I want to get an 05 type s sway but I want energy suspension bushings.