PDA

View Full Version : what numbers should i be getting?


wishbear
05-06-2008, 09:59 AM
i got jrrh cai and evo2 with a afvc2 looking more like 160whp?
shadowmd
05-06-2008, 10:01 AM
its possible....but i was thinkin like 155whp....all depends on what dyno u go to.
wishbear
05-06-2008, 01:01 PM
its going to be at a dyno jet
wishbear
05-06-2008, 02:15 PM
got some shitty numbers for jrrh and cai and evo2 i got 157whp and 128tq
T_Virus
05-07-2008, 08:14 AM
Those are not shitty #'s...it is probably because of the afvc2...from the past threads before it crashed, the afvc2 doesn't do squat...get K-pro and you will be looking at more than 160whp
BlownSi05
05-07-2008, 10:21 AM
i got jrrh cai and evo2 with a afvc2 looking more like 160whp?

the afvc2 is a vtec controller isnt it? if it is, it is not worth your time and money on the k20a3.

wishbear, that is about the same as i got with k-pro base map. injen sri, jrrh, hks hi-power w/ kpro base map got be almost identical numbers. my baseline was like 137whp/109wtq or something like that.
T_Virus
05-07-2008, 11:50 AM
the afvc2 is a vtec controller isnt it? if it is, it is not worth your time and money on the k20a3.

wishbear, that is about the same as i got with k-pro base map. injen sri, jrrh, hks hi-power w/ kpro base map got be almost identical numbers. my baseline was like 137whp/109wtq or something like that.

dynojet or dynapack? anyways...change your sri to cai and get your K-Pro tuned...you should be over 160whp...
ALL MotoR Ep3
05-07-2008, 11:53 AM
you should be looking roughly 150-160hp with a good kpro tune u should see like 170...and like 135 lbs of trq
wishbear
05-09-2008, 03:02 PM
how much hp im i looking at for the crank? 180?
bigo711
05-11-2008, 03:00 PM
its possible....but i was thinkin like 155whp....all depends on what dyno u go to.

yeah that..i doubt you'll make more than that..
I think what's more important is to get a baseline reading before mods or before tune. that way you know you gained something.
T_Virus
05-12-2008, 08:38 AM
yeah that..i doubt you'll make more than that..
I think what's more important is to get a baseline reading before mods or before tune. that way you know you gained something.

You doubt wrong...see post #4...Wishbear made 157whp and 128tq :whistle:
kspec03
05-12-2008, 11:47 PM
get rid of that vtec controller and get kpro....