View Full Version : JDM CTR 22mm rear sway bar?
nos4mao
05-09-2008, 09:45 PM
Where can I buy this sway bar.... everywhere I look its now where to be found. I' ve tried icb motorsport but they are all sold out...WTF... ive checked ebay and they have it but its for 1996-2000 EK9. Any suggestions?
Thanks,
Matt
Karma
05-09-2008, 09:55 PM
as an alternative, you could go with the rsx 21mm (forgot which year).
someone around here knows.
MugsyTheGr8
05-09-2008, 10:11 PM
pick up the 21mm rsx rear sway from the classifieds on crsx.
LvisDin
05-09-2008, 10:16 PM
www.jdmland.com
MugsyTheGr8
05-09-2008, 10:18 PM
www.jdmland.com
that would be ibc motorsports, they are out of stock.
lazeebeast35
05-10-2008, 12:07 AM
i believe the type-s would be the 21mm and the base rsx is only 19, thats what i have on my ep, bout to get progress tho.
nos4mao
05-10-2008, 05:17 AM
Thanks for your help... yea I was thinkin about the RSX 21mm but I just thought there woulnt be a big difference in handling compared to now... but anyways it helps!
Thanks,
Matt
talonXracer
05-10-2008, 05:45 AM
Just get a 05'+ typeS rear sway, it is 21mm and is less than half the price of a JDM bar and you will never know the difference, I have had both, sold the CTR rear sway.
You will notice a big difference with the 21mm bar over the scrawny stock bar.
CivicS
05-10-2008, 07:51 AM
go with progress 24mm w/tie bar.........
RedSiBaron
05-10-2008, 08:12 AM
wayne at ssr may have some...
nos4mao
05-10-2008, 10:54 AM
Where can I get the RSX 21mm bar. I went onto clubrsx and couldnt find it... any suggestions?
Thanks,
Matt
talonXracer
05-10-2008, 11:00 AM
http://www.acuraautomotiveparts.org/acura/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=RSX&catcgry2=2005&catcgry3=3DR+TYPE-S&catcgry4=KA6MT&catcgry5=REAR+LOWER+ARM&ListAll=All&vinsrch=no&systemcomp=&vinnoT=&trim=&trans=&view=normal
lazeebeast35
05-10-2008, 01:04 PM
go with progress 24mm w/tie bar.........
i thought the progress was only 22mm unless its for the type-s cus i never really looked into that.
nos4mao
05-10-2008, 03:42 PM
The Progress is 22mm where as the RSX type-S is 21mm... I still cant decide.... I really want to get the Progress but dont I dont want have it banging my GReddy Ti-C!!
is this a straight swap? or is some kind of modification necessary?
nos4mao
05-10-2008, 09:20 PM
what do you mean by straight swap?
MugsyTheGr8
05-10-2008, 09:44 PM
what do you mean by straight swap?
hes asking if it is a direct fit or if he would need bushings and or w/e
nos4mao
05-10-2008, 10:20 PM
Oh ok gotcha ya... but I think the progress comes with the bushings etc,.... but the RSX-S bar not sure... I imagine that it comes with bushings as well. Thats what I hope.
Mechanic
05-11-2008, 02:41 AM
Just get a 05'+ typeS rear sway, it is 21mm and is less than half the price of a JDM bar and you will never know the difference, I have had both, sold the CTR rear sway.
You will notice a big difference with the 21mm bar over the scrawny stock bar.
x2. If the endlink bolts aren't rusted, you can swap the two bars in less than a half hour.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.