PDA

View Full Version : Replacing interior lights



wil524
05-11-2008, 12:39 PM
Anyone know how to get the light on the vent selection, a/c button and recirculation button to work again? Can I just replace the bulbs (if there is any) in them?

wil524
05-12-2008, 08:15 PM
Nobody ever had any of the switches and buttons on the center console not light up?

RedSiBaron
05-12-2008, 08:37 PM
Nobody ever had any of the switches and buttons on the center console not light up?

yah mine went out and i keep forgetting to get the little bulbs from honda...you basicly just take off the HVAC panel there and there are little spots on the back of the controls that turn and you can put new bulbs in...

bmyers4321
05-12-2008, 08:39 PM
ok heres what you need to do.

D is where the three buttons are located. you will need to take the 2 screw on the side out and remove it(it will make this alot easier). then on the back you will see two spots for the light bulb. take a pocket screw driver and turn it to remove. careful the bulbs are tiny. then just reverse to install. shouldnt take more than 10-15 min to do.

http://img397.imageshack.us/img397/2949/rjaai003204az3.png
having access to ISIS makes things so much easier. if you need something PM me i can always look it up for ya.

wil524
05-13-2008, 04:54 AM
Thanks, what type of bulbs are these and where can I get them? Would it be something that I can get at Pep Boys or any local place?

bmyers4321
05-13-2008, 06:25 AM
you can probly go to a local place and get it.

my suggestion though would to be go to the dealer nearest you they will have it in stock and know exactly which bulb you need.