G..
05-11-2008, 12:50 PM
Ok finally gotten round to taking some updated pics of how she currently stands. As the others on here were from various stages. Not brilliant but hopefully you get an idea of where she is going.
http://images.fotopic.net/ytz8q5.jpg
http://images.fotopic.net/ytz8qs.jpg
http://images.fotopic.net/yqsr5j.jpg
http://images.fotopic.net/ytz8q7.jpg
http://images.fotopic.net/ytz8q3.jpg
http://images.fotopic.net/ytz8q2.jpg
http://images.fotopic.net/ytz8qf.jpg
I know the wheels may not be to everyones taste being both small, and red :D, but I think they are a little cheeky...
And now the overnight bits from the US.... ta da.....
http://images.fotopic.net/y6y1dz.jpg
Above is everything, well except the exhaust centre section.
http://images.fotopic.net/y6y1e2.jpg
LCA's and tie bar
http://images.fotopic.net/y6y1ef.jpg
Backbox, to be honest it looks pretty well made, seems solid, with good welds. light too. All stainless and full 70mm. I think this is gonna be LOUD!!!!!. Does have a bung though.
http://images.fotopic.net/y6y1es.jpg
gearknob, this is very heavy!
Any excuse to show the ARC kit again:
http://images.fotopic.net/yt0ni1.jpg
And look, don't laugh, but it's me :D :D
http://images.fotopic.net/ytm7vh.jpg
Spec List so far.
EXTERIOR
Buddy Club Carbon Bonnet
De badged (well the Honda one anyhoo)
CHASSIS
New wheels. Rota GT3. Black 16".
Yokohama Parada Spec 2's 205x45x16
J's Racing locking nuts
3G brake Disks and Mintex pads.
E-Tech strut brace
AST Coilovers. Fast road set up.
Camber bolts front, adjustable arms rear.
To go on: JDM ARB, Skunk2 LCA and Lower tie bar.
ENGINE/DRIVE TRAIN
K-Pro
AEM induction
Jackson Racing Header
Buddy Club Spec IV Exhaust.
JDM Clutch and lighter flywheel.
Stiffer E/S engine mounts.
Buddy Club oil cap
Buddy Club radiator cap
To go on: Tracy Sports throttle body. ARC Induction, Skunk2 Stage 2 cams, Valves, titanium retainers. Skunk2 Exhaust.
INTERIOR
Caged 6 point roll cage in red
Takata Harnesses
Buddy Club (there is a theme here huh...) Seats
KEY!S Racing steering wheel
Works Bell Rapfix QR Hub
Buddy Club gear knob
JDM Carpets
Sparco Pedals
D.R.E Shiftlight
JVC headunit
http://images.fotopic.net/ytz8q5.jpg
http://images.fotopic.net/ytz8qs.jpg
http://images.fotopic.net/yqsr5j.jpg
http://images.fotopic.net/ytz8q7.jpg
http://images.fotopic.net/ytz8q3.jpg
http://images.fotopic.net/ytz8q2.jpg
http://images.fotopic.net/ytz8qf.jpg
I know the wheels may not be to everyones taste being both small, and red :D, but I think they are a little cheeky...
And now the overnight bits from the US.... ta da.....
http://images.fotopic.net/y6y1dz.jpg
Above is everything, well except the exhaust centre section.
http://images.fotopic.net/y6y1e2.jpg
LCA's and tie bar
http://images.fotopic.net/y6y1ef.jpg
Backbox, to be honest it looks pretty well made, seems solid, with good welds. light too. All stainless and full 70mm. I think this is gonna be LOUD!!!!!. Does have a bung though.
http://images.fotopic.net/y6y1es.jpg
gearknob, this is very heavy!
Any excuse to show the ARC kit again:
http://images.fotopic.net/yt0ni1.jpg
And look, don't laugh, but it's me :D :D
http://images.fotopic.net/ytm7vh.jpg
Spec List so far.
EXTERIOR
Buddy Club Carbon Bonnet
De badged (well the Honda one anyhoo)
CHASSIS
New wheels. Rota GT3. Black 16".
Yokohama Parada Spec 2's 205x45x16
J's Racing locking nuts
3G brake Disks and Mintex pads.
E-Tech strut brace
AST Coilovers. Fast road set up.
Camber bolts front, adjustable arms rear.
To go on: JDM ARB, Skunk2 LCA and Lower tie bar.
ENGINE/DRIVE TRAIN
K-Pro
AEM induction
Jackson Racing Header
Buddy Club Spec IV Exhaust.
JDM Clutch and lighter flywheel.
Stiffer E/S engine mounts.
Buddy Club oil cap
Buddy Club radiator cap
To go on: Tracy Sports throttle body. ARC Induction, Skunk2 Stage 2 cams, Valves, titanium retainers. Skunk2 Exhaust.
INTERIOR
Caged 6 point roll cage in red
Takata Harnesses
Buddy Club (there is a theme here huh...) Seats
KEY!S Racing steering wheel
Works Bell Rapfix QR Hub
Buddy Club gear knob
JDM Carpets
Sparco Pedals
D.R.E Shiftlight
JVC headunit