PDA

View Full Version : Lets talk alignment and camber (Mustclime!!!)



liquid cooled
05-13-2008, 07:26 PM
So, this friday im putting on my Teins and eventually the car is going to be lowered on 17X7 probably with a 17/15/215 or 225. Anybody with similar want to throw up their alignment specs that they used so I know what to tell the shop thats doing my alignment after I get done with the install.

Windchaser
05-13-2008, 07:53 PM
if you are requesting Mustclime, you might as well step over to clubep3 for a faster response.

liquid cooled
05-13-2008, 08:27 PM
im looking for anybodys specs

Slip_Angle
05-13-2008, 08:30 PM
Camber -1.5 Front and Rear
Front - 1/32 Toe Out
Rear - 1/32 Toe In

HFP Shocks/Springs
27mm Progerss Front Sway
24mm Progress Rear Sway

Slight oversteer at the limit depending on tire pressures.

mutt
05-15-2008, 04:34 PM
06 dc5 on progress coilovers, progress sways, rear bar set stiff.

front: 1.5 deg camber, zero toe.
rear: .75 deg. camber, 1/32 toe in.
225/45/17 yoko s-drives on 17x7.5 rim.

slight oversteer at the limit. I keep thinking I'll toe in the front a bit. Turns in very quickly, but it's a little nervous on a straight road.

Zzyzx
05-15-2008, 05:00 PM
The original thread got nuked. but someone saved the text..

http://ephatch.com/forum/showpost.php?p=516149&postcount=6

FoReVaPmP
05-15-2008, 05:19 PM
You can also Pm Scott ( Mustclime) he checks his PMs....:mbiggrin: