PDA

View Full Version : udated k pro and now code and no launch control



roboticfailure
05-18-2008, 03:01 AM
hello has anyone here downloaded the new k pro updates from hondata yet, I did it at the track tonight and the dam launch conrol doesnt work you can switch it to always on,and nothing.switch it to brake,or any of the other options and it works fine but always on doesnt do crap,also when I updated it I got a cel of p1121 wich is throttle position lower than normal? what the hell does that mean, it came at the worst possible time please any feedback would be great, I went to the hondata forum and I am not the only person with this issue.

talonXracer
05-18-2008, 07:37 AM
I have the newest upload and I had no issues other than I did have to relearn the TPS limits. I dont use the launch limiter so I cant help on that.

thisisagame24
05-18-2008, 08:35 AM
how do you relearn the tps limits?

talonXracer
05-18-2008, 09:38 AM
how do you relearn the tps limits?

Open up your calibration with Kmanager. On the parameters page, select the TPS tab. At the bottom of the window you will see a min and max reading. Connect up to your ECU, turn the ignition on, but engine off. Make sure you are on-line, select the lightning bolt at the top of the page. Now look at the TPS min reading and hit the min read button, now hold the throttle to the floor and hit the max read. The TPS is now electronically centered.

thisisagame24
05-18-2008, 10:38 AM
good to know doug


sorry for the delay on those datalogs. i havnt had much time. i will try to get some tonight to you bud

weltall
05-18-2008, 11:07 AM
my read buttons never work i have to look to see what it is and manually type it in for my tps to work right

im still using 1.2.3.3

and i just use the old launch limiter as launch control

roboticfailure
05-18-2008, 12:24 PM
yeah I really wish I could just reload the map that was used on the old version but it wont let us, dam you new version, so on the whole relearning the tps thing,is that why I am getting the code 1121.

weltall
05-18-2008, 02:17 PM
un install the old version

roboticfailure
05-18-2008, 02:52 PM
its not the old version I am having a problem with its the new one, is there anyway I can reinstall the old one.

weltall
05-18-2008, 06:20 PM
oh i meant uninstall the new one and reinstall the oder version

hopefully you save all versions of kmanager like i do

roboticfailure
05-18-2008, 06:39 PM
dam, I do not. is there any other place I can get the old version from?

weltall
05-18-2008, 07:26 PM
do you have aim?

hit me up ill be on

(weltuned)

roboticfailure
05-19-2008, 02:31 AM
I dont, but my tuner does what is your adress?

IcyDeath
05-23-2008, 05:02 PM
Can someone explain how launch control works on our cars? I know what it is, if it's the same kinda thing that the VW ppl are using with their DSG transmissions, but how would this work on a manual gearbox ep3?

SyckSiR
05-23-2008, 09:52 PM
Can someone explain how launch control works on our cars? I know what it is, if it's the same kinda thing that the VW ppl are using with their DSG transmissions, but how would this work on a manual gearbox ep3?

its like a redline for before u start movin....if u set it at 3500 then u wont be able to go beyond that until u start goin...

weltall
05-23-2008, 10:14 PM
isnt that the same thing as the normal launch limiter in older versions

im still using the older version with timing retard and fuel enrichment as a two step and i can make 7psi free revving

i dont know why there are two different ones in the new version unless you want to arm one for track use and still have the regular free rev limiter

the full throttle shifting has sparked my interest but i wont get to try it out untill my head gasket comes in

roboticfailure
05-24-2008, 01:04 AM
the new version is so f#*ked up I want to cry. I wish I can turn back time and never have downloaded it.

roboticfailure
05-24-2008, 01:05 AM
not launching under boost = sadness