how to replace rotors

[davec]

i am replacing my rotors and the bolt won't come out any suggestions. the bolts are rusted in and i have tried PB Blaster but still no luck.

[oogy-boogy]

What bolts? Caliper?

If you're talking about the 2 phillips screws you need an impact screwdriver (cheap at harbor freight).

[wil524]

What bolts? Caliper?

If you're talking about the 2 phillips screws you need an impact screwdriver (cheap at harbor freight).

Yeah, be careful you don't strip the head on the screws trying without the impact screwdriver.

[lil_Eggy]

Yeah, be careful you don't strip the head on the screws trying without the impact screwdriver.

i stripped one of them when i was doing my brakes....had to use a dremel to cut a new slot and used a flat head finally get the thing off

[RHCP0801]

they sell a craftsman impact screwdriver at sears too, the bits are kinda cheap but lifetime warranty