View Full Version : how to replace rotors
davec
05-19-2008, 04:42 PM
i am replacing my rotors and the bolt won't come out any suggestions. the bolts are rusted in and i have tried PB Blaster but still no luck.
oogy-boogy
05-19-2008, 04:46 PM
What bolts? Caliper?
If you're talking about the 2 phillips screws you need an impact screwdriver (cheap at harbor freight).
wil524
05-19-2008, 05:04 PM
What bolts? Caliper?
If you're talking about the 2 phillips screws you need an impact screwdriver (cheap at harbor freight).
Yeah, be careful you don't strip the head on the screws trying without the impact screwdriver.
lil_Eggy
05-19-2008, 06:51 PM
Yeah, be careful you don't strip the head on the screws trying without the impact screwdriver.
i stripped one of them when i was doing my brakes....had to use a dremel to cut a new slot and used a flat head finally get the thing off
RHCP0801
05-19-2008, 07:10 PM
they sell a craftsman impact screwdriver at sears too, the bits are kinda cheap but lifetime warranty
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.