View Full Version : Short shifter
SI Swede
05-22-2008, 10:55 AM
I have thought about getting a short shifter installed in my ep. But I have heard people say that it is not good for the tranny on ep3's. I would like to get some more information on this! Are there any problems that could cause damage from using a short shifter in a ep tranny?
thanks!
Psykoasn
05-28-2008, 09:17 PM
i'v had my Neuspeed short shifter adapter for almost a year, and i haven't run into any problems
SyckSiR
05-28-2008, 09:23 PM
get the buddy club...the neuspeed makes the shifter look stupid....
the feel of shifting is the same with the aluminum bushings IMO
talonXracer
05-29-2008, 06:34 AM
Forget about the POS Neuspeed short shift adaptor and go with the BC shifter if you want to reduce the shift pattern.
Kodeen
05-29-2008, 06:41 AM
The BCSS (and I'm assuming the Neuspeed as well) will not cause any damage to your transmission. There's been musing as to whether a heavy shift knob like the Skunk2 would be bad for your synchros (I don't know either way), but a short shifter by itself will cause no damage.
BlownSi05
05-29-2008, 07:02 AM
i am confused on how a short shifter of any type could damage or cause problems in the tranny since the change in throw distance and stiffness is all done at the shifter assembly itself.:suspicious:
on the latter note, definatly get the buddy club short shifter.
05silversi
05-29-2008, 03:25 PM
Are there any problems that could cause damage from using a short shifter in a ep tranny?
IMO shorter throws actually reduce potential for the "false gear" type of mis-shift that eats syncros.
dragon208
06-16-2008, 05:48 PM
does the BCSS workw ith 6 speed?
i just got my BCSS in the mail and it's for EP3 butit says 5 speed on the side.. but i have a 6speed tranny?
K-Shark
06-16-2008, 06:03 PM
does the BCSS workw ith 6 speed?
i just got my BCSS in the mail and it's for EP3 butit says 5 speed on the side.. but i have a 6speed tranny?
yes it will work with the 6 spd. BC is a japanese company that designed it for the JDM CTR.
dragon208
06-16-2008, 08:20 PM
yes it will work with the 6 spd. BC is a japanese company that designed it for the JDM CTR.
that's what i thought also.. but the side of the box says 5 speed EP3?!?!? lol..
bigred
06-16-2008, 09:26 PM
BCSS FTMFW...get a set of the shifter bushings also if u want even tighter feel! :mcool:
Kodeen
06-17-2008, 07:49 AM
that's what i thought also.. but the side of the box says 5 speed EP3?!?!? lol..
Yeah, I saw that and thought that maybe they were making a USDM specific shifter. Post up if you have any issues, since mine said that on the box and I'm gonna be putting in a sixth gear here pretty soon.
Stoop
06-17-2008, 08:52 AM
get a set of the shifter bushings also if u want even tighter feel! :mcool:that's what she said.......:mbiggrin::mconfused:
dragon208
06-17-2008, 10:00 AM
that's what she said.......:mbiggrin::mconfused:
hahaha
dragon208
06-17-2008, 07:29 PM
Yeah, I saw that and thought that maybe they were making a USDM specific shifter. Post up if you have any issues, since mine said that on the box and I'm gonna be putting in a sixth gear here pretty soon.
confirmed!! u need to modify the BCSS a bit to fit the 6th gear.... just got mine installed tonight.. feels GOOD!! :-)
Kodeen
06-18-2008, 10:35 AM
confirmed!! u need to modify the BCSS a bit to fit the 6th gear.... just got mine installed tonight.. feels GOOD!! :-)
What did you have to do to get it to work?
dragon208
06-18-2008, 10:43 AM
What did you have to do to get it to work?
had to shave off one side of the shifter..
if u have pix of it on it's side to the 6th/Reverse gear i will show u what u need to shave off
dragon208
06-18-2008, 10:46 AM
ok i marked it down
in red is where u need to shave off to fit the 6th
http://i45.photobucket.com/albums/f88/dragon208/EP3_Short_Shifter_sized.jpg
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.