PDA

View Full Version : k20 longblock



frankdogg
05-27-2008, 11:31 AM
quick question, i found a local person selling the ITR k20a longblock for like 2800 but it doesn't come with ecu, harness or axles.

my main question is, can i use the stock ep3 axles with the itr motor with no problem or would i need the itr axles?

thanks

talonXracer
05-27-2008, 11:34 AM
EP3 axles will work fine, the trans end splines are all the same for Honda's Kseries. The outer ends are vehicle specific.

Not a bad price, and the PRC harness and ECU would have to be replaced with typeS parts anyways.

frankdogg
05-27-2008, 02:04 PM
so basically if i got this motor, all i would need is kpro (preferably on a prb ecu for the reverse lock out)?

Draw7Seven
05-27-2008, 02:09 PM
That and an A2 harness, I think.

talonXracer
05-27-2008, 02:26 PM
I would also get a A2/A3 VTEC solenoid and A2 engine harness.

ALL MotoR Ep3
05-27-2008, 02:43 PM
yea ep3 axles will work either get a type-R ecu or K-pro your existing ECU and your ep3 harness should work with it too...