Pioneer DEH-P7900BT DIN, does it fit on my EP3?

[tigerpg]

Hello guys!!
I want to replace my stock cdplayer on my SI 2002. I bought this pioneer one. OEL display, bluetooth, etc... On their site, it indicates DIN.
Does it fit on my deck without putting any spacer or plates?

http://akamaipix.crutchfield.com/products/2007/130/h130DEHP790-f_dgp.jpg

[VegaS10]

You will need a dashkit for ANY aftermarket radio in our cars.

[tigerpg]

ok, something like this, right?

http://akamaipix.crutchfield.com/products/2002/120/h120997860-f.jpeg

[VegaS10]

Correct.

[tigerpg]

Thanks buddy!!

[3dkahuna]

Hello guys!!
I want to replace my stock cdplayer on my SI 2002. I bought this pioneer one. OEL display, bluetooth, etc... On their site, it indicates DIN.
Does it fit on my deck without putting any spacer or plates?

http://akamaipix.crutchfield.com/products/2007/130/h130DEHP790-f_dgp.jpg

You will need a dashkit for ANY aftermarket radio in our cars.

You don't have to have that kit if you don't want too.

You can still install an aftermarket radio in the car without the kit.

It all comes down to personal preference on how you want your center console to look.

[AzNCrAzYcOoLeR]

i have the 6900 and its great. used the spacer like the picture shown

[EP3driver]

You don't have to have that kit if you don't want too.

You can still install an aftermarket radio in the car without the kit.

It all comes down to personal preference on how you want your center console to look.

Did you install it? Any pics? I do not think you need a kit as long as you can use the OEM radio brackets inside to hold the new Pioneer unit in place. Does the Pioneer come with a separate Tweeter feed or just four speakers? I need to know since I am buying a new unit but want to keep the tweeters as they are in the car now.

[VegaS10]

You need a dashkit or else there will be gaps.

The Metra 70-1721 is the only wiring harness you need.

Very simple install.