PDA

View Full Version : Map sensor on a RBC mani



talonXracer
05-29-2008, 09:08 AM
With moving the MAP sensor from the TB onto the mani(alot smoother map signal) the wire harness loops out over the mani, like this
http://i54.photobucket.com/albums/g96/talonxracer/IMG_06242.jpg

I made a small plate that rotates and mounts the MAP sensor to this.
http://i54.photobucket.com/albums/g96/talonxracer/IMG_0761.jpg

brandan_renner
05-29-2008, 11:09 AM
would this apply to any k manifold or is it only worth wile on the rbc

talonXracer
05-29-2008, 12:07 PM
Only the RBC mani, the PRB and PRC do not have a provision for mounting the MAP on them, they are on the TB with those.

brandan_renner
05-29-2008, 12:14 PM
ah ok that makes sense

chubbychu
05-29-2008, 12:50 PM
Cool. A little less stress on the wiring i suppose. What does the plate look like?

talonXracer
05-29-2008, 01:25 PM
It is a simple "L" bracket made from some scrap sheet steel laying around the garage.

Jpax
05-29-2008, 03:00 PM
I like the Duel mapsensors people were runing, combined they could get 20 psi...... ROFL.

haha just kidding.


Awesome mod ill show this to my Eg friends that have this intake mani

talonXracer
05-29-2008, 03:04 PM
In the second pic you can see the simple metal plate I made to retain the rubber plug that comes with the Karcepts adaptor.