PDA

View Full Version : k24a1 swap



wishbear
05-29-2008, 09:23 PM
i was wondering if my k24a1 goes in can i still use my jrrh in it spec for ep3

03Si757
05-29-2008, 09:43 PM
i was wondering if my k24a1 goes in can i still use my jrrh in it spec for ep3

I highly doubt it without modifying it. The K24 will sit about an inch higher.

illusionsoflife
05-30-2008, 01:07 AM
just need to get the part that connects to the exhaust modded. should only be about 50 dollars. only problem here at least is finding a shop to do it. here they wont touch cars without cats.

davisj3537
05-30-2008, 06:07 AM
I have heard the jrrh works "ok". It is gonna hit something but it will work from my understanding.

Gilmour
05-30-2008, 07:39 AM
I have heard the jrrh works "ok". It is gonna hit something but it will work from my understanding.

Yeah I remember back in the day that was the header people used with there K24 swaps.

wishbear
05-30-2008, 09:50 AM
can i fix the problem with a type s sway bar?

Gilmour
05-30-2008, 10:13 AM
That I'm not sure, I never dropped a K24 in a EP with a JRRH. I'm sure someone that has will chime in soon.

davisj3537
05-30-2008, 11:40 AM
can i fix the problem with a type s sway bar?

No. You would want to lean closer to an em2 sway bar.

ALL MotoR Ep3
05-30-2008, 11:44 AM
Yea it will work.....just will hit...unless you change your sway

wishbear
05-30-2008, 12:05 PM
what sway bar can i use?

davisj3537
05-30-2008, 12:15 PM
what sway bar can i use?


No. You would want to lean closer to an em2 sway bar.
Reading is required.lol.
Wait a minute...maybe its the Em1 sway bar. Someone correct me.

talonXracer
05-30-2008, 12:27 PM
The sway that fits is the EM2, from the 03' civic EX. It is 19mm dia.

I have one NIB with bushings that will be in the classifieds this afternoon.

davisj3537
05-30-2008, 12:40 PM
I kinda browse through threads all day mostly looking for threads that don't have too many replies. For most of the time if there a good number of replies the question has already been answered. When I see Doug has posted regardless of how many replies there are I normally don't even open the thread since the question has already been answered.lol. There should almost be an autolock feature after Doug posts in a thread.

Draw7Seven
05-30-2008, 12:48 PM
I kinda browse through threads all day mostly looking for threads that don't have too many replies. For most of the time if there a good number of replies the question has already been answered. When I see Doug has posted regardless of how many replies there are I normally don't even open the thread since the question has already been answered.lol. There should almost be an autolock feature after Doug posts in a thread.

But then we wouldn't be able to postwhore by kissing his ass after he answers the TS's question. :mredface: