Lower Control Arm Question

[ep3_si]

Okay i went to get my Alingment done yesterday at Tire Plus and they told me that my passenger lower control arm is a little bent...well i did bump into a curb from the side of my tire...so the question is that...are the RSX or RSX-S have the same or similar lower control arm as our EP's???

[simcivic08]

no, the patern of the 3 bolt at the end (tire side) is different. while you're at changing them, go with some omni or Skunk2 :mtongue:

[ep3_si]

no, the patern of the 3 bolt at the end (tire side) is different. while you're at changing them, go with some omni or Skunk2 :mtongue:

alrite...thanks for the help

[talonXracer]

I do beleive he is referring to the front LCA's not the rear,,,The 02'-04' RSX uses the same LCA as the EP3, the later models use a larger ball joint and wont work.

[Lucid Moments]

I do beleive he is referring to the front LCA's not the rear,,,The 02'-04' RSX uses the same LCA as the EP3, the later models use a larger ball joint and wont work.

I was about to wonder about that.

[Jman900]

i got told that to that my front right is bent a little.. but i dont remember hitting anything..

[mustclime]

stay away from the 05-06 type-s lca...they have a larger lower ball joint hole.
all the others will fit.