PDA

View Full Version : diy alignment: camber gauges



MugsyTheGr8
06-05-2008, 06:31 PM
what would be a good one to get that is still relatively accurate. im seeing that the price range from $50 to $200 and im looking at ones somewhere in the middle of that price range.

im liking this (http://cgi.ebay.com/ebaymotors/Fastrax-Camber-Caster-Gauge_W0QQcmdZViewItemQQcategoryZ63702QQihZ017QQit emZ270243477209QQrdZ1QQsspagenameZWDVW) one. ive seen it in some articles in grassroots magazine.

Drew1d
06-05-2008, 06:44 PM
If I only had a level place. :mfrown:

MugsyTheGr8
06-05-2008, 06:45 PM
If I only had a level place. :mfrown:

unless its drastic, you can use linoleum floor tiles to make up the difference, but if its one of those driveways like in queens with a 45 degree incline, your sol.

4angrybadgers
06-05-2008, 07:47 PM
That gauge doesn't have toe plates in the photo, so you'd probably have to get those as well.

I bought an SPC Performance bubble gauge (http://store.summitracing.com/partdetail.asp?autofilter=1&part=SPS%2D91000&N=700+0&autoview=sku) and the toe plates (http://store.summitracing.com/partdetail.asp?autofilter=1&part=SPS%2D91100&N=700+0&autoview=sku) from Summit Racing. Total was $211 shipped. I've used it a few times, and it works pretty well.

MugsyTheGr8
06-06-2008, 11:08 AM
That gauge doesn't have toe plates in the photo, so you'd probably have to get those as well.

I bought an SPC Performance bubble gauge (http://store.summitracing.com/partdetail.asp?autofilter=1&part=SPS%2D91000&N=700+0&autoview=sku) and the toe plates (http://store.summitracing.com/partdetail.asp?autofilter=1&part=SPS%2D91100&N=700+0&autoview=sku) from Summit Racing. Total was $211 shipped. I've used it a few times, and it works pretty well.

that spc gauge looks alot like the fastrax one.

readong>me, they are the same thing