BC cams

[KevinEP3]

I just got my bc cams in but they are stg 3 and i ordered st 2. does anybody know how they run. should i send them back for sg 2. my mods are sri/sh/e/kpro thanks

[kon]

I'm not too familiar with the bc cams but I know that running skunk2 stage 3 (a3 cams) is not a bad thing. I believe that the 2 are very simular. As long as you upgrade the valvetrain you will be fine running these cams. Make sure you get a nice header/exhaust setup along with kpro to maximize the gains.

[KevinEP3]

I'm not too familiar with the bc cams but I know that running skunk2 stage 3 (a3 cams) is not a bad thing. I believe that the 2 are very simular. As long as you upgrade the valvetrain you will be fine running these cams. Make sure you get a nice header/exhaust setup along with kpro to maximize the gains.

thanks i had to edit my post i have sri, sh 2.5" exhaust and kpro so as long as i do valve train it be ok. i wanted to supercharge it later will i need different cams.

[kon]

Not too sure on the supercharge idea. I know the stage 2's work better, but you'll be fine to run these...should be no clearance issuses.

[FoReVaPmP]

I just got my bc cams in but they are stg 3 and i ordered st 2. does anybody know how they run. should i send them back for sg 2. my mods are sri/sh/e/kpro thanks

Brian Crower jr or Buddy Club??...:mredface:

[KevinEP3]

Brian Crower jr or Buddy Club??...:mredface:

brian crower jr.

[jaeguyoon]

i have these cams, but I got them with the k24a1 head. here is my thread on it.



http://ephatch.com/forum/showthread.php?t=43265