PDA

View Full Version : Help with HID Kit!



socalsx
06-12-2008, 08:29 PM
I just got my xenon kit from XenithXenons and had a trial getting them to work. Now that they do work, the car says my brights are on. and when i go to flash the brights, they flicker. I have an 03 and bought the h4 hi/low kit. like i said i had a hard enough time switching the red and two blacks just to get them to work. They also don't seem very bright as well. any ideas?

phister
06-12-2008, 09:55 PM
You probably have the wiring for the lights backwards. Heres a diagram of the h4 wiring harness. Pay no attention to the writing on the bottom right. Hopefully that'll fix your problem

http://www.mobilehid.com/h4/h402.jpg

ckelvin5
01-18-2011, 10:56 PM
I have an 03 and i have the low kit and they wont turn on. the high beams work fine. so which pins exactly do i need to move please let me know thanks!

ckelvin5
01-19-2011, 06:51 AM
I tried this and it did not work

jed_averill
01-19-2011, 11:39 AM
Take off everything and try again. Happened to me twice and I caught my mistakes by redoing it.