K24 + Race Header

[Slip_Angle]

1.Does anyone know what race header fits with a K24?
2.Are there any race headers that bolt u to a cat or come with one?

[kon]

1.Does anyone know what race header fits with a K24?
2.Are there any race headers that bolt u to a cat or come with one?

I believe the only header made that will fit the EP3 with a K24 is a custom header made by Hytech or SSR or the likes. I've personally used an EP3 specific DCRH with a k24 and it fit, but not perfectly. There was about .5" clearance between the sway bar but it never really hit (not that I could hear anyway). Once I installed the BCRH, it was a different story. No clearance, so we had to extend the secondary pipes to gain some room. I now have a custom fitted BCRH, it will unfortunately be for sale soon :)

[Chazwick05]

i'm running a comptech rh, and will be picking up a k24a1 shortly, and it'll fit, but that's because i'm not running a front sway :mredface:

[az-epdrvr]

strup headers works as well

[davisj3537]

Strup/dcrh/jrrh(hits slightly)/hytech/ssr. None have cats.

[bmyers4321]

ehh id stay away from Strup. i read on CRSX that is hit or miss with the quality.

[Gilmour]

You could always run a high flow cat after your RH. Thats what I had on my Kswapped EK.