Ep3 No.2
06-18-2008, 07:35 PM
recently got my car started after 2years and 3 months of sitting in my garage. did what i could off of sounds and common sence. and so far in the past two days i(relevant wise atleast)...
replaced radiator, fan, hoses and therm.
filled coolant
changed oil and filter
installed dc5r tb, 85a mm, and a few other small things.
cleaned iacv
fixed alternator
siphoned out 7gallons of 2 year old gas
a few other small things.
but my problem is w my idle. i havent driven it on the road yet. i had a massive vacuum leak at the intake manifold base but torqued the bolts and it worked fine. now my problem is 1, my water guage doesnt work any more but reads on kpro(wierd thing was it worked the first day i started it but not anymore) 2, for the error codes window in kmanager everything reads as "not supported" even when i have the parameters->misc->enable emissions error checking, box checked. i thought my 11.5 a/f ratio at idle could be because of running no exhaust and the pcm tried to compensate for the lean mixture but if that was the case i dont think it would compensate it that rich. it also sounds like i have a engine misfire which i know should throw a code but it isnt(and yes i checked the plugs). i jus needed help getting my error code components to be " support"
tia,
Aaron
replaced radiator, fan, hoses and therm.
filled coolant
changed oil and filter
installed dc5r tb, 85a mm, and a few other small things.
cleaned iacv
fixed alternator
siphoned out 7gallons of 2 year old gas
a few other small things.
but my problem is w my idle. i havent driven it on the road yet. i had a massive vacuum leak at the intake manifold base but torqued the bolts and it worked fine. now my problem is 1, my water guage doesnt work any more but reads on kpro(wierd thing was it worked the first day i started it but not anymore) 2, for the error codes window in kmanager everything reads as "not supported" even when i have the parameters->misc->enable emissions error checking, box checked. i thought my 11.5 a/f ratio at idle could be because of running no exhaust and the pcm tried to compensate for the lean mixture but if that was the case i dont think it would compensate it that rich. it also sounds like i have a engine misfire which i know should throw a code but it isnt(and yes i checked the plugs). i jus needed help getting my error code components to be " support"
tia,
Aaron