need a good recomendation

[hksfan]

im looking to get a new clutch for my car and planning to go JRSC next year... whats a good clutch for DD, and one that will work on my stock flywheel?

[clutch797]

clutchnet.com buddy. I ran the race kit with their yellow x2 pp and fiber carbon disk. Great for what you want. I have run that and a clutchnet 6 puck and trust me, don't do a 6puck for what kind of power your looking to make.

[Fico]

i daily drive a Compatition 6 puck sprung clutch, it releases a little close to the floor but you can adjust that other then that i love it not a problem to speak of!!!!

[talonXracer]

Clucthnet red 2x and kevlar disc or CM FX300

[clutch797]

Maybe it's hit or miss with the 6puck. I can dd with mine don't get me wrong, but I don't need it anymore and it grabs why to hard for my k24 with bolt on's. I hate reverse with the 6 puck, it feels like it's going to break the trans. if your don't rev the crap out of your motor while slipping it.

[Fico]

i have a k24 with bolt ons, 6 speed trans with lsd so my power isnt split through one wheel so that might be why

[clutch797]

i have a k24 with bolt ons, 6 speed trans with lsd so my power isnt split through one wheel so that might be why

Very well could be. Since i have gone back to n/a and no more boost i can't stand the 6puck. It chatters in 1st and like crazy in reverse. I hope to get my new stock disk and yellow x2 pp installed this weekend.

[Fico]

I don’t have any chatter at all... I have an F1 Racing 11lb fly wheel rsx-s 02 6 speed, obx lsd, competition stage 4 6 puck spring....shit I just realized how much money I waste on my car lol, I digress... the only problem I have been having is the engagement of the pedal, it hits ON my floor not right above, I tried to space out the ball in the tranny the shifter fork rides on but it didn’t help much

[clutch797]

I don't know, maybe the competition stage 4 is smoother then the clutchnet stage 4 6puck. I'm running the stock ep3 flywheel.

[Fico]

it might be the flywheel, mine is an rsx-s style one *shrugs*

[hksfan]

okay so most of you upgraded your fly wheel? i was trying to stay with the stock one to save some money... will the clutchnet one work?

[Fico]

okay so most of you upgraded your fly wheel? i was trying to stay with the stock one to save some money... will the clutchnet one work?

i would reccomend a flywheel upgrade to an RSX-S because then you will have a larger spectrum of clutches to choose from. you can get a stock rsx-s if you want it will work fine and be cheap

[davisj3537]

Best option IMO competition stage2 clutch and stock rsx fly. You can get both shipped for about 425 total.

[clutch797]

you can get any of the clutchnet disks or pp for the ep3 flywheel.

[hksfan]

okay well since there are more choices of clutches for the rsx flywheel... can i use the k20z1 flywheel?

[Fico]

talon would know better then i, but that goes without saying, there is nothing that man doesnt know

[04cvcsi]

i have a 2005 type-s flywheel for sale (~30,000 original miles)
hit me up if you want more info

[na14yu]

For a DD with bolt-ons and even a JRSC, I don't see why you would need to use anything other than a stock clutch.

There are HPDE / track cars out there with 150,000 miles running on stock clutches. Save your money and your leg muscle.

[clutch797]

He is right. I ran the race kit for a good while with the stock clutch. As long as you don't dump the clutch or do lots of drag then you should be fine.

[SP33D FREAK]

thats the problem most of us do some launching :)

I love the Competiton Clutch 6 puck.

[SP33D FREAK]

thats the problem most of us do some launching :)

I love the Competiton Clutch 6 puck.



I retract this last statement. Comp clutch sucks. I have been through 4 comp clutches and each one breaks in the exact same spot. Pure crap.

[AKEP]

epic, because i make as much torque as you, and i'm looking for a new clutch as well. will def not be getting comp clutch. i may be making more tq here shortly. since we did bump this thread, what would be a clutch that has a comparable feel to OEM, but can hold upwards of 300-350tq?

[SP33D FREAK]

epic, because i make as much torque as you, and i'm looking for a new clutch as well. will def not be getting comp clutch. i may be making more tq here shortly. since we did bump this thread, what would be a clutch that has a comparable feel to OEM, but can hold upwards of 300-350tq?




Clutchnet hands down the absolute best.

[AKEP]

idk man, that hate thread on google has me wondering, poor nissan guys clutch fell apart...i mean it happens but damn. 3rd hit on google...
how long have you had yours?