Gargola
06-28-2008, 02:51 PM
Ok, I found this thread, but I didn't want to highjack it, as he has a slightly different setup.
http://www.ephatch.com/forum/showthread.php?t=45445&highlight=OEM+SPrings
I'm going to replace SKUNK2's with OEM struts, to stock OEM springs and struts over the July 4th weekend.
I want to make sure I have all the parts I need.
I took some pictures of the fronts to assist in the process.( I'll try to get some of the back later tonight.)
From what I have read I will need at least the bumpstops for all wheels.
I have also added the rear Struts bolts to the list ( They are almost stripped out)
I would like to confirm, after I order these parts I will be stuck with them.
My goal is="Daily driver" that doesn't bottom out with my 18 inch wheels.
Front pics
http://i296.photobucket.com/albums/mm175/gargola2000/Civic-suspension/DSC05616.jpg
http://i296.photobucket.com/albums/mm175/gargola2000/Civic-suspension/DSC05618.jpg
If you look closely, you can see a piece of rubber hanging, I am assuming this is a cut bump stop, thoughts?
http://i296.photobucket.com/albums/mm175/gargola2000/Civic-suspension/DSC05619.jpg
http://i296.photobucket.com/albums/mm175/gargola2000/Civic-suspension/DSC05620.jpg
http://i296.photobucket.com/albums/mm175/gargola2000/Civic-suspension/DSC05622.jpg
Here is a link to my thread, in case you have question as to what my ultimate goal is.
http://www.ephatch.com/forum/showthread.php?t=48774&goto=newpost
Thanks!
http://www.ephatch.com/forum/showthread.php?t=45445&highlight=OEM+SPrings
I'm going to replace SKUNK2's with OEM struts, to stock OEM springs and struts over the July 4th weekend.
I want to make sure I have all the parts I need.
I took some pictures of the fronts to assist in the process.( I'll try to get some of the back later tonight.)
From what I have read I will need at least the bumpstops for all wheels.
I have also added the rear Struts bolts to the list ( They are almost stripped out)
I would like to confirm, after I order these parts I will be stuck with them.
My goal is="Daily driver" that doesn't bottom out with my 18 inch wheels.
Front pics
http://i296.photobucket.com/albums/mm175/gargola2000/Civic-suspension/DSC05616.jpg
http://i296.photobucket.com/albums/mm175/gargola2000/Civic-suspension/DSC05618.jpg
If you look closely, you can see a piece of rubber hanging, I am assuming this is a cut bump stop, thoughts?
http://i296.photobucket.com/albums/mm175/gargola2000/Civic-suspension/DSC05619.jpg
http://i296.photobucket.com/albums/mm175/gargola2000/Civic-suspension/DSC05620.jpg
http://i296.photobucket.com/albums/mm175/gargola2000/Civic-suspension/DSC05622.jpg
Here is a link to my thread, in case you have question as to what my ultimate goal is.
http://www.ephatch.com/forum/showthread.php?t=48774&goto=newpost
Thanks!