View Full Version : Sway bars...
RS_man
07-11-2008, 04:10 PM
Is it worth it to pickup a CTR front sway bar?
Distance
07-11-2008, 04:37 PM
EDIT: forget what I said. Reading pwns me
mustclime
07-11-2008, 04:38 PM
Is it worth it to pickup a CTR front sway bar?
only if you have ctr ft lca's and axils.....
fyi....the front bars...
ep3=25.4 mm hollow bar
dc5=25.4 mm hollow bar
you see, the dc5-r had al lca's, the lca are 10mm wider than stock to increase negative camber and track width.....this ment the swaybars had different mounting points...so if you get the front type-r bar....it will not mount to your stock lca.
Btrthnezr3
07-11-2008, 04:39 PM
The rear sway is a better investment imo.
T_Virus
07-11-2008, 09:53 PM
I just had the ctr rear sway bar with skunk 2 lca's and tie rod...I can't really tell the differnce of the lca's and tie rod but with the ctr rear sway I felt a little more oversteer...it is a good investment...now I just got to get use to it....I'm dropped on Tein Basics
Btrthnezr3
07-11-2008, 10:06 PM
I had the CTR sway with Neuspeed Strut bar and rear lower tie, HFP suspension
Felt awesome.
oldschoolimport
07-12-2008, 06:45 AM
if you want to go down in the front, the early type s had a 23mm, where the ctr was 22. its about as close as you will get without spending a wad of cash.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.