Sway bars...

[RS_man]

Is it worth it to pickup a CTR front sway bar?

[Distance]

EDIT: forget what I said. Reading pwns me

[mustclime]

Is it worth it to pickup a CTR front sway bar?

only if you have ctr ft lca's and axils.....

fyi....the front bars...
ep3=25.4 mm hollow bar
dc5=25.4 mm hollow bar

you see, the dc5-r had al lca's, the lca are 10mm wider than stock to increase negative camber and track width.....this ment the swaybars had different mounting points...so if you get the front type-r bar....it will not mount to your stock lca.

[Btrthnezr3]

The rear sway is a better investment imo.

[T_Virus]

I just had the ctr rear sway bar with skunk 2 lca's and tie rod...I can't really tell the differnce of the lca's and tie rod but with the ctr rear sway I felt a little more oversteer...it is a good investment...now I just got to get use to it....I'm dropped on Tein Basics

[Btrthnezr3]

I had the CTR sway with Neuspeed Strut bar and rear lower tie, HFP suspension
Felt awesome.

[oldschoolimport]

if you want to go down in the front, the early type s had a 23mm, where the ctr was 22. its about as close as you will get without spending a wad of cash.