PDA

View Full Version : ebay fogs



jdm03ep
07-18-2008, 11:50 AM
Im trying to get this kit installed. i have the lights mounted and most of the wiring done. i just cant figure the last step. at the end of the harness there are 2 loose wires ( a blue one and a black one). where do they go?

jdm03ep
07-18-2008, 03:38 PM
anyone?

Ep_patty86
07-18-2008, 04:09 PM
When we put mine in that i got off ebay the wiring was all jacked up and we had to run the wires ourself to a switch

ohdamngetit
07-18-2008, 04:33 PM
by any chance, that blue and black wire connected to a harness? If so, disconnect and I'm pretty sure it goes to your fuse panel. Cant remember to be honest, last time I did an ebay kit was awhile ago. Pics would help if anything G/L

civictype_r04
07-19-2008, 08:19 AM
I agree it goes to the blue wire goes to the fuse panel and the black wire gets grounded.

jdm03ep
07-19-2008, 07:33 PM
it clip or be unclipped from the harness and there is no plug at the other end. its just two loose wires. im trying to get some pics. i should be able to have them up soon.

PaTTi2103a
07-19-2008, 08:43 PM
http://www.handaaccessories.com/civic/sifogs.pdf

go to step #28. u see where the 6 pin connector goes. the black wire goes all day way to da left and blue goes all da way to da ryte. be sure to use electric tape so the wires dont touch anything.
black-> - - - - - -<-blue

http://i34.tinypic.com/j6po1t.jpg

u see the red line on the picture, u only need those 2 wires so pull them out of the connectors carefully bcuz ur going to need the pins on each of the wires end to connect to the fuse box.

jdm03ep
07-21-2008, 12:45 AM
i got it. it looks fly. thank you guys fr helping, i'll post pics for you guys soon.