PDA

View Full Version : 06 base and Z1 tran?



davisj3537
07-18-2008, 12:29 PM
Ok I know if you wanted to use a z1 or z3 tranny on a 02-04 rsx then you have some issues. My question is how about using a z1 tran on a 06 base rsx? Does it have the same issues or is it a bolt on affair?

davisj3537
07-18-2008, 02:04 PM
BUMP:msmile:

lldiesel386ll
07-18-2008, 07:02 PM
Ok I know if you wanted to use a z1 or z3 tranny on a 02-04 rsx then you have some issues. My question is how about using a z1 tran on a 06 base rsx? Does it have the same issues or is it a bolt on affair?

looking at acuraoemparts, the speed gear isnt needed in the 05-06 base rsx transmissions. i figure that means all 05-06 transmissions use the same vss. the 05-06 transmissions should be interchange-able. im sure that the same issues would come up with using the reverse lockout solenoid and the engine wire harness though. hope that helps. this is all speculation of course, but hopefully that leads somewhere in the right direction

davisj3537
07-25-2008, 12:02 PM
Cool thanks man! Its kinda what I was thinking...

DarkSiRacer
07-28-2008, 12:01 PM
This guy here has a lot of good info...

http://ephatch.com/forum/showthread.php?t=46376

DarkSiRacer
07-28-2008, 12:02 PM
It looks like you need to have the speed gear and the vss relocated for using any Z trans...

Word
07-28-2008, 12:07 PM
Yes... I have the Z1 trans I'm working on now and it has the A3/A2 VSS position plugged and you need to tap it and use the a3/a2 vss for it to work... Since you are moving it you need to place that speed ring in...

lldiesel386ll
07-28-2008, 07:14 PM
you can do that, but apparently dave has already written something that may simplify the process
http://ephatch.com/forum/showthread.php?t=49990
:thumbu: hope that helps :mcool: