PDA

View Full Version : Base map for k24 frank



Deadphishy
07-28-2008, 12:29 PM
Well I need a base map to start tuning off of for my k24a1 with a TSX head and type s cams.

Compression is about 11.7/1
stock 2003 a2 cam
Race head with restrictive exhaust
if anyone could help me out that would be great.

Thanks
Ryan

Civic5lug
08-04-2008, 07:02 PM
are the a2 cams a good profile to run with the tsx head?

Guardian
08-04-2008, 07:47 PM
Well I need a base map to start tuning off of for my k24a1 with a TSX head and type s cams.

Compression is about 11.7/1
stock 2003 a2 cam
Race head with restrictive exhaust
if anyone could help me out that would be great.

Thanks
Ryan

you could start with the tsx kal

kon
08-05-2008, 01:36 PM
you could start with the tsx kal

Thats a good idea. If you wanted to play it really safe, just retard the ignition 2 degrees across the board and see if the engine knocks. You should be fine though.

Deadphishy
08-05-2008, 05:46 PM
are the a2 cams a good profile to run with the tsx head?

I hope so thats all i have.:mcry:

I'm working on building an a2 head over the winter. gasket matching, a little polishing, and some decent cams. Maybe 06 TSX.

Deadphishy
08-05-2008, 05:49 PM
you could start with the tsx kal

I like it too, because it limits the VTC gear to 25 degs. I have 50 deg clearance but i won't go past 35.

thetunersource
08-06-2008, 06:34 PM
yea i would suggest the tsx kal as well

davisj3537
08-19-2008, 06:55 AM
I'm tuning a tsx today and wanted to start with something a little more aggressive than the tsx kal...any other suggestions? I guess worst case I'll start with it and spend a few hours on the dyno:msmooch: