ECU question: PNF vs. PRB

[djelly84]

ok, so i have k-pro on a PNF...from what i know the difference with the PRB is the reverse solinoid(spelling)...for the rsx-s tranny, that prevents you from shifting from 6 into reverse if the car is moving forward...my question is: does k-pro eliminate the difference between the two ecu's...like somehow add a solinoid to a PNF ecu so that it will have the reverse solinoid...this may be a dumb question, but yeah is the solinoid a physical solinoid on the board or does adding k-pro add it to 5speed ECU's like the PNF? PRB, PNF whatever...all i know is i love PBR

[thetunersource]

i love pb&j

[02EP3SI]

find out which pin it is on the PRB connector, look for that pin on the PNF if it has one run a wire from that point to the lock out solenoid and see if it works. But thats the onlyu difference and im running kpro on a PNF and i have a 6 speed trans and i dont have a problem if thats what your asking.