Anyone Running 16x8 +15mm Wheels?

[mattism78]

I've searched around and had no real conclusive pics. Most wheels I've found are 0's and I think they actually poke a bit much for my taste. I'm trying to find a set of +15mm's on an EP to see if the rear wheels are flush, or poke before I order a set. Thanks in advance.

[jdm_ep3]

yeah im running them the sportmax 501 16x8 +15 offset. it sticks out about half a inch but some negative camber will make it sit flush

[mattism78]

yeah im running them the sportmax 501 16x8 +15 offset. it sticks out about half a inch but some negative camber will make it sit flush

Do you have some pics you could post please? Bonus points for rear/side shots. :mbiggrin:

[Zeth]

i think there was a guy that posted pics of those rims in the aggressive wheel offset thread. i even think it had a rear/side view.

[skoundrelusa]

From this thread

http://www.ephatch.com/forum/showthread.php?t=44634&highlight=sportmax


i have the 501's +15 offset and im running 205 50 16 with a fender roll in the rear. All you really need is some neg camber to make it fit. but for the 002's 0 offset you'll need stretched tire, neg camber, fender roll, and a slight pull to make them fit.
http://i16.photobucket.com/albums/b4/drkpnoy/IMAGE_063.jpg