Wheel Spacer + extened lug question

[player757]

i recently purchased a wilwood bbk from fico and im having the same offset issues as he was. Basically what i need to do is run a wheel spacer.(15mm)

i am looking to buy this http://www.evasivemotorsports.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=EM&Product_Code=KICS-5015W1
can any one tell me if i will need to remove the stock hub and studs or dose this go over the top of the existing

[pynikal]

you just bolt them to the top of the hub with the supplied nuts. just make sure you trq them to 80ft lbs at least. i do 100 ft lbs.

[player757]

thanks i though i was never gonna get an answer. do you have these by any chance also any vibrations?

[pynikal]

i use spacers but not that kind on my EK. i will be getting those for my EP soon.

[Windchaser]

I have 4 lug Project Kics 10mm wheel spacer for sale.

[player757]

thanks but i need at least 10 mm to make it fit

[Windchaser]

thanks but i need at least 10 mm to make it fit

huh? mine are 10mm. you mean you need 5 lug ones to make it fit.

[player757]

sorry i ment i need at least 15mm or the the equivalent of .256 in. thick

[Windchaser]

sorry i ment i need at least 15mm or the the equivalent of .256 in. thick

How wide are the calipers? I'm running a 6-piston Endless setup and the Endless calipers are a little wider than the 6-piston Project Mus. @ +42, all you really need are 5mm-10mm spacers to clear the brakes.

[player757]

i do think you are correct sir i did the conversion and it seems i'll only be needing about a 6.5mm spacer so i'll take em can i get a price?

[Windchaser]

http://i33.photobucket.com/albums/d64/artificeexks/IMG_0577.jpg
http://i33.photobucket.com/albums/d64/artificeexks/IMG_0582.jpg
http://i33.photobucket.com/albums/d64/artificeexks/IMG_0583.jpg