Z33_HR
08-12-2008, 08:32 AM
Hey everyone,
I've been doing little things to my EP3 since I purchased it brand new almost 5 years ago. I'm done messing around, I'm doing one last time, the real deal, 100% my way!! Here's a parts list and some ideas I may be using...
Body
- 02-03 JDM CTR Bodykit (have but is not currently installed)
- Mugen Replica Spoiler (on order..thank you to Chuck @ Showstoppers for the hook up!)
- 04-05 LHD CTR Projectors (have, but not sure if i'm going to use them)
- 02-03 CTR Headlights (still looking for a set)
- Rolled rear fenders
- New Paint Job..staying with white, but more of a creamy pearl shade. trying to get a more exagerated shade of NH-0. Still looking for a trustworthy bodyshop that won't butcher my car..the search continues..:mcry:
Drivetrain
- K24a1 Longblock *thanks to Rob @ JDMCARS.com
- Blueprint H Beam Rods *thanks to Ben @ Blueprint
- CP 87.5mm, 12.5:1 pistons *thanks to James @ IPG Parts
- ARP Headstuds
- Skunk2 Stainless Valves OEM size *thanks to Roland @ MB Racing
- Skunk2 Pro Series Retainers *thanks to Roland @ MB Racing
- Skunk2 Dual Valvesprings *thanks to Roland @ MB Racing
- Toda Spec A3 Cams
- RBC Intake Manifold
- SSR Engineering 4-2-1 Race Header *thanks to Danny Tran
- OBX LSD *thanks to James @ Sparktec Motorsports
- TSX 6th Gear (need to order)
- Competition Clutch Stg 4 w/ 9lb flywheel *thanks to Roland @ MB Racing
- Hondata KPro *thanks to Carey @ Full Throttle Performance NYC
- Hondata IMG *thanks to Carey @ Full Throttle Performance NYC
- Avid Racing Motor Mounts 70a Billets *thanks...job...ahaha lol:tehehyper:
Brakes/Suspension
- Tein Flex Coilovers
- Tein EDFC (need to order)
- SPC Rear Camber Kit might mod to replace bushing with spherical bearing
- Work VS XX 17x8 Gold (going to order soon as i figure out the offsets)
- Wilwood front BBK
- EPS removal (replacing with a type s rack converted to manual)
- Spherical bearings for Front LCA bushings
Interior
- EDM CTR Gauge Cluster
- CTR door panels
- OEM CF dash kit
- CTR Recaros (still looking for a clean set)
- DC5-R pedal set w/dead pedal (need to order)
- EDM FN2 Shift boot (need to order)
- EDM FD2 Shift boot (need to order)
Misc
- ABS removal?? (still need to do more homework)
- AC removal (cuz I need that extra 2hp :-)
- Engine bay wire tuck/shave/fuse box relocation (anyone know of an expert in this department in the GTA???)
First off, here is what the car looked like last summer. It is currently 100% stock before going under the knife :mcool:
http://pic19.picturetrail.com:80/VOL1050/4186975/16482132/280600866.jpg
And here's a sneak peak at some parts I've been compiling for many, many long months now:mcry:..lol I'm glad I can finally start putting something together!! Enjoy!!
http://pic19.picturetrail.com:80/VOL1050/4186975/20307592/329933790.jpg
http://pic19.picturetrail.com:80/VOL1050/4186975/20307592/329933805.jpg
http://pic19.picturetrail.com:80/VOL1050/4186975/20307592/329933772.jpg
Aug 14/08 Update:
Took of my beat up Tein Flex coilovers. Sending them back for a rebuild...
http://pic19.picturetrail.com/VOL1050/4186975/20307592/329933829.jpg
Aug 20/08 Update:
Its my birthday!! Happy Birthday to ME!! :whoo:
And look what arrived just in time for my special day :vtec:
The ECU cover is a little beat up, that just symbolized how much of a warrior this ECU is going to be!!
http://pic19.picturetrail.com/VOL1050/4186975/20307592/331041398.jpg
I've been doing little things to my EP3 since I purchased it brand new almost 5 years ago. I'm done messing around, I'm doing one last time, the real deal, 100% my way!! Here's a parts list and some ideas I may be using...
Body
- 02-03 JDM CTR Bodykit (have but is not currently installed)
- Mugen Replica Spoiler (on order..thank you to Chuck @ Showstoppers for the hook up!)
- 04-05 LHD CTR Projectors (have, but not sure if i'm going to use them)
- 02-03 CTR Headlights (still looking for a set)
- Rolled rear fenders
- New Paint Job..staying with white, but more of a creamy pearl shade. trying to get a more exagerated shade of NH-0. Still looking for a trustworthy bodyshop that won't butcher my car..the search continues..:mcry:
Drivetrain
- K24a1 Longblock *thanks to Rob @ JDMCARS.com
- Blueprint H Beam Rods *thanks to Ben @ Blueprint
- CP 87.5mm, 12.5:1 pistons *thanks to James @ IPG Parts
- ARP Headstuds
- Skunk2 Stainless Valves OEM size *thanks to Roland @ MB Racing
- Skunk2 Pro Series Retainers *thanks to Roland @ MB Racing
- Skunk2 Dual Valvesprings *thanks to Roland @ MB Racing
- Toda Spec A3 Cams
- RBC Intake Manifold
- SSR Engineering 4-2-1 Race Header *thanks to Danny Tran
- OBX LSD *thanks to James @ Sparktec Motorsports
- TSX 6th Gear (need to order)
- Competition Clutch Stg 4 w/ 9lb flywheel *thanks to Roland @ MB Racing
- Hondata KPro *thanks to Carey @ Full Throttle Performance NYC
- Hondata IMG *thanks to Carey @ Full Throttle Performance NYC
- Avid Racing Motor Mounts 70a Billets *thanks...job...ahaha lol:tehehyper:
Brakes/Suspension
- Tein Flex Coilovers
- Tein EDFC (need to order)
- SPC Rear Camber Kit might mod to replace bushing with spherical bearing
- Work VS XX 17x8 Gold (going to order soon as i figure out the offsets)
- Wilwood front BBK
- EPS removal (replacing with a type s rack converted to manual)
- Spherical bearings for Front LCA bushings
Interior
- EDM CTR Gauge Cluster
- CTR door panels
- OEM CF dash kit
- CTR Recaros (still looking for a clean set)
- DC5-R pedal set w/dead pedal (need to order)
- EDM FN2 Shift boot (need to order)
- EDM FD2 Shift boot (need to order)
Misc
- ABS removal?? (still need to do more homework)
- AC removal (cuz I need that extra 2hp :-)
- Engine bay wire tuck/shave/fuse box relocation (anyone know of an expert in this department in the GTA???)
First off, here is what the car looked like last summer. It is currently 100% stock before going under the knife :mcool:
http://pic19.picturetrail.com:80/VOL1050/4186975/16482132/280600866.jpg
And here's a sneak peak at some parts I've been compiling for many, many long months now:mcry:..lol I'm glad I can finally start putting something together!! Enjoy!!
http://pic19.picturetrail.com:80/VOL1050/4186975/20307592/329933790.jpg
http://pic19.picturetrail.com:80/VOL1050/4186975/20307592/329933805.jpg
http://pic19.picturetrail.com:80/VOL1050/4186975/20307592/329933772.jpg
Aug 14/08 Update:
Took of my beat up Tein Flex coilovers. Sending them back for a rebuild...
http://pic19.picturetrail.com/VOL1050/4186975/20307592/329933829.jpg
Aug 20/08 Update:
Its my birthday!! Happy Birthday to ME!! :whoo:
And look what arrived just in time for my special day :vtec:
The ECU cover is a little beat up, that just symbolized how much of a warrior this ECU is going to be!!
http://pic19.picturetrail.com/VOL1050/4186975/20307592/331041398.jpg