PDA

View Full Version : h4 to 9005/9006



PaTTi2103a
08-13-2008, 09:42 PM
can someone tell me if this diagram is legit.

http://i35.tinypic.com/14171b7.gif

D3xn2o
08-16-2008, 11:52 AM
This diagram is tooo confusing but yes it seems right

wishbear
08-17-2008, 11:05 AM
it seems right just follow the direction very carefully

v1c10us
08-17-2008, 10:52 PM
no that is incorrect.
we have one power wire and 2 ground wires.
the power wire is solid red, the low beam ground is red with white stripes and the high beam ground is red with a blue stripe.
but otherwise yes that is correct, so what you will be doing in a much more simple way because that diagram sucks, it shouldnt cross the lines over so much my eyes started hurting.
You'll take low beam ground from h4 and connect it to 9006, it doesnt matter which one because power can flow either direction.(i think thats the lowbeam bulb, but if not, then you'll do that to 9005)
you'll take highbeam ground and run it to 9005.(or 9006 if thats the highbeam, cant remember)
you'll take the H4 power wire and split it and run it to the remaining terminal on both the 9005 and 9006. TADA!