Si-Kotic
08-14-2008, 02:41 PM
Yes I have spent a lot of time searching today. And I know the thread exists because I had it as a favorite on my old computer before it crashed. But can anyone help me with a picture that shows how to fix the S2K engine start button. If you pull the button apart there's a motherboard on the inside and on the bottom half with the bus lines you can see one bus is blown. In order to fix that in a previous thread someone had a picture of two of the metal "spikes" or prongs sticking up and you have to solder (sp) one prong to another and then a second prong next to the first to another. Could anyone give me the link to that thread or show me which four prongs need to be soldered to fix this button. Thanks in advance.
Here's a picture of my button and you can see the blown bus.
http://i33.photobucket.com/albums/d89/Si-Kotic821/DSCN0033.jpg
Here's a picture of my button and you can see the blown bus.
http://i33.photobucket.com/albums/d89/Si-Kotic821/DSCN0033.jpg